Device Configurator: - PCD7.D457VT5F: 5.7’’ programmable panel - PCD7.D410VT5F: 10’’ programmable panel - PCD7.D412DT5F: 12’’ programmable panel - PCD3.M6860: controller with 2 Ethernet interfaces - PCD1.M0160E0: e-controller - PCD1.M2110R1 room controller - PCD1.M2160: PCD1 controller New communication modules The new advanced communication modules PCD2.F2150 and PCD3 [...] the Ni 1000 L&S temperature sensor has been implemented in the new COSinus version 1.20. Monitoring and logging of meter data On PCD1.M0160E0, PCD1.M2160, PCD3.Mxx60 (PCD3+) and PCD
Device Configurator: - PCD7.D457VT5F: 5.7’’ programmable panel - PCD7.D410VT5F: 10’’ programmable panel - PCD7.D412DT5F: 12’’ programmable panel - PCD3.M6860: controller with 2 Ethernet interfaces - PCD1.M0160E0: e-controller - PCD1.M2110R1 room controller - PCD1.M2160: PCD1 controller New communication modules The new advanced communication modules PCD2.F2150 and PCD3 [...] the Ni 1000 L&S temperature sensor has been implemented in the new COSinus version 1.20. Monitoring and logging of meter data On PCD1.M0160E0, PCD1.M2160, PCD3.Mxx60 (PCD3+) and PCD
Device Configurator: - PCD7.D457VT5F: 5.7’’ programmable panel - PCD7.D410VT5F: 10’’ programmable panel - PCD7.D412DT5F: 12’’ programmable panel - PCD3.M6860: controller with 2 Ethernet interfaces - PCD1.M0160E0: e-controller - PCD1.M2110R1 room controller - PCD1.M2160: PCD1 controller New communication modules The new advanced communication modules PCD2.F2150 and PCD3 [...] the Ni 1000 L&S temperature sensor has been implemented in the new COSinus version 1.20. Monitoring and logging of meter data On PCD1.M0160E0, PCD1.M2160, PCD3.Mxx60 (PCD3+) and PCD
. HMI Editor and PCD3.M_ or PCD2.M480: Wrong characters are display instead of value with Format #####! (FAQ #100360) When an element is configured as Integer with the format ##### (without dot) the value of the register is wrongly displayed on the terminal. This is a FW bug in the actual version of the PCD3.M_ and PCD2.M480. This problem occurs with all FW version up to: PCD3.M_ #13 (that means also 010, #11, #12) PCD2.M480 #23 (that means also 020, #21, #22) Solution Please
. HMI Editor and PCD3.M_ or PCD2.M480: Wrong characters are display instead of value with Format #####! (FAQ #100360) When an element is configured as Integer with the format ##### (without dot) the value of the register is wrongly displayed on the terminal. This is a FW bug in the actual version of the PCD3.M_ and PCD2.M480. This problem occurs with all FW version up to: PCD3.M_ #13 (that means also 010, #11, #12) PCD2.M480 #23 (that means also 020, #21, #22) Solution Please
some protective measures. Information about protective measures can be found on the support hp If you need a PCD with cyber security levels SL3+ and based on ANSI ISA 62443 then checkout our PCD3.M6893 (QronoX PCD), this PCD was developed for cybersecure applications. Information's can be found here . [...] with header line N4.3 On the Niagara article, for the Saia-PCD Supervisor version 1.1, check the column with header line N
.ch. On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s possible to use BACnet on both ports ETH1 or ETH2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a bad behavior on BACnet. The activation and selection of the used Ethernet port for BACnet communication on the PCD3.M6860 is done in PG5 2.2 or PG5 2.3
.ch. On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s possible to use BACnet on both ports ETH1 or ETH2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a bad behavior on BACnet. The activation and selection of the used Ethernet port for BACnet communication on the PCD3.M6860 is done in PG5 2.2 or PG5 2.3
.ch. On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s possible to use BACnet on both ports ETH1 or ETH2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a bad behavior on BACnet. The activation and selection of the used Ethernet port for BACnet communication on the PCD3.M6860 is done in PG5 2.2 or PG5 2.3
Product Category Remote I/O PCD7.Lxxx S-Bus RIO L3xx: Analogue input RIO [...] PCD7.L3xx S-Bus remote I/O's Documentation [...] speed of the PCD7-L60x-1 Example: If the register has the value: ‘30’ then the maximum speed would be 3 and the minimum speed 0 ‘22’ then the maximum speed would be 2 and the minimum speed 2 -> the
