. Firmware compatibility PCD6.M3 and PCD6.M1/2 (FAQ #100147) PCD6.M3 PCD2.M1/M2 Ã [...] Ethernet module. However, as the PCD6 system has been discontinued, also the Ethernet module (PCD7.F651) for the PCD6 systems has been discontinued. To have an Ethernet TCP/IP port on a PCD, a PCD6.M3F650 had to be ordered (not possible any more). This version of the PCD6.M3 contains a PCD7.F651 module and has an Ethernet connector on the front plate instead of a D-Sub connector. It takes a single slot
. Firmware compatibility PCD6.M3 and PCD6.M1/2 (FAQ #100147) PCD6.M3 PCD2.M1/M2 Ã [...] Ethernet module. However, as the PCD6 system has been discontinued, also the Ethernet module (PCD7.F651) for the PCD6 systems has been discontinued. To have an Ethernet TCP/IP port on a PCD, a PCD6.M3F650 had to be ordered (not possible any more). This version of the PCD6.M3 contains a PCD7.F651 module and has an Ethernet connector on the front plate instead of a D-Sub connector. It takes a single slot
Our solution Products: Classic/PG5 Restrictions Building Automation and Control Network PCD1.M2, PCD2.M5 and PCD3 with BACnet [...] of PCD2.M5xx0 and PCD3.Mxxx0 CPUs, FBoxes are available. System partners provide solutions as well: Classic: refer to www.engiby.ch or www.ludwig-systemelektronik.de for more information [...] /PG5 Products: xx7/Step7 Restrictions This is a variant of the Modbus protocol on Ethernet Modbus is supported by the Firmware of PCD2.M5xx0 and PCD3
. Firmware compatibility PCD6.M3 and PCD6.M1/2 (FAQ #100147) PCD6.M3 PCD2.M1/M2 Ã [...] Ethernet module. However, as the PCD6 system has been discontinued, also the Ethernet module (PCD7.F651) for the PCD6 systems has been discontinued. To have an Ethernet TCP/IP port on a PCD, a PCD6.M3F650 had to be ordered (not possible any more). This version of the PCD6.M3 contains a PCD7.F651 module and has an Ethernet connector on the front plate instead of a D-Sub connector. It takes a single slot
. Firmware compatibility PCD6.M3 and PCD6.M1/2 (FAQ #100147) PCD6.M3 PCD2.M1/M2 Ã [...] Ethernet module. However, as the PCD6 system has been discontinued, also the Ethernet module (PCD7.F651) for the PCD6 systems has been discontinued. To have an Ethernet TCP/IP port on a PCD, a PCD6.M3F650 had to be ordered (not possible any more). This version of the PCD6.M3 contains a PCD7.F651 module and has an Ethernet connector on the front plate instead of a D-Sub connector. It takes a single slot
. 4.3" PCD7.D543RF Resistive touchscreen 4.3” TFT 15:9 - 64K, 480 × 272, Linux 3 [...] PCD7.D570CF: 7” TFT 15:9 - 16M, 800 × 480, WVGA, Linux RT, ARM Cortex-A9 dual core - 800 MHz 10.1" PCD7.D510CF Capacitive touchscreen 10.1” TFT 16:10 - 16M, 1280 × 800, WXGA, Linux RT, ARM Cortex-A9 dual core - 800 MHz
. Timings Display PCD7.D120 with a PCD3.M5xxx (FAQ #101569) The settings for Clock period High and Clock period low must be 2 / 150 same settings as for the PCD2.M [...] signal display CXG291M4N could be used. Introduction Due to a low demand, the delivery of PCD7.D120 displays will be discontinued in the year 2008 (last order: 31.09.2008). The repair
. Timings Display PCD7.D120 with a PCD3.M5xxx (FAQ #101569) The settings for Clock period High and Clock period low must be 2 / 150 same settings as for the PCD2.M [...] signal display CXG291M4N could be used. Introduction Due to a low demand, the delivery of PCD7.D120 displays will be discontinued in the year 2008 (last order: 31.09.2008). The repair
replace the CPU of a PCD4 installation by a PCD3 or a PCD2.M5 (while keeping the PCD4 I/Os). The PCD4 family has been discontinued and is no longer available. Please refer to FAQ 101098 for more [...] Product Category Archive Programmable Controller PCD4:CPUs, cassette design U [...] PCD4.U100 upgrade kit Documentations
replace the CPU of a PCD4 installation by a PCD3 or a PCD2.M5 (while keeping the PCD4 I/Os). The PCD4 family has been discontinued and is no longer available. Please refer to FAQ 101098 for more [...] Product Index Archive PCD4 U100 General [...] PCD4.U100 upgrade kit Documentations
