standard IEC 61131-3 Order details PCD3.M6893 IEC 61131-3 high-level language programming PLC PCD8.QronoX-SSA Service and Support agreement on an annual base for two registered users Access to the Saia PCD QronoX Portal PCD8.QronoX-Tbase IEC 61131-3 Online programming workshop, 40h compact knowledge Documentation Features of Saia PCD [...] Compatible with PCD3 I/O system Full Modular I/O System Reuse of robust and proven modules Easy upgrade existing installations
supporting the "Secure S-Bus Data mode"). Saia PCD® COSinus based systems (PCD2.M480, PCD2.M5xx0 and PCD3) are not concerned. Reason The reason for this behavior is that the PCD/PCS does not correcly [...] ! How long does it take to load the supercap? (FAQ #100707) The PCD1.M110, PCS1 and PCD3 are equipped with a supercap [...] Saia PCD® COSinus systems (PCD3, PCD2.M5 and PCD2.M480) this problem doesn't occur
supporting the "Secure S-Bus Data mode"). Saia PCD® COSinus based systems (PCD2.M480, PCD2.M5xx0 and PCD3) are not concerned. Reason The reason for this behavior is that the PCD/PCS does not correcly [...] ! How long does it take to load the supercap? (FAQ #100707) The PCD1.M110, PCS1 and PCD3 are equipped with a supercap [...] Saia PCD® COSinus systems (PCD3, PCD2.M5 and PCD2.M480) this problem doesn't occur
) on Saia PCD® COSinus systems (PCD3, PCD2.M5, PCD1.M2 and PCD2.M480). This phenomenon is based on the internal mechanism how the firmware assigns the port. It has not been observed before the usage of [...] ). The new FBox library for Modbus "Modbus SBC Version" which takes advantage of the Modbus implementation directly in the Saia PCD® COSinus firmware. Available for PCD1.M2, PCD3 and PCD2.M5 with firmware [...] .engiby.ch ) and supported also by PCD systems previous to the PCD3, PCD2.M5xxx and PCD1.M2xxx families (e.g. PCD2.M1x0, PCD2.M480 or PCD1.M1xx). Remarks In order to use the firmware implementation
patch 15 (version 1) and install it again. Main corrections in PG5 In the Device Configurator a correct subnet mask was idicated as invalid The analog outputs of a PCD3.M2130V6 could not be scaled correctly (German language only). When using the Device Configurator port 3 of a PCD3.M5340 could not be used as Master Gateway Help file for the Device Configurator added [...] :55:35 caused assembler error. EIB Library 2.5.312 - EIB Net/IP driver: multi-telegram buffer implemented. - FBox "EIB RCV Time+Date" improved Modbus(for PCD3 and PCD2.M5xx0 FW 1.10.16 and later), version
patch 15 (version 1) and install it again. Main corrections in PG5 In the Device Configurator a correct subnet mask was idicated as invalid The analog outputs of a PCD3.M2130V6 could not be scaled correctly (German language only). When using the Device Configurator port 3 of a PCD3.M5340 could not be used as Master Gateway Help file for the Device Configurator added [...] :55:35 caused assembler error. EIB Library 2.5.312 - EIB Net/IP driver: multi-telegram buffer implemented. - FBox "EIB RCV Time+Date" improved Modbus(for PCD3 and PCD2.M5xx0 FW 1.10.16 and later), version
patch 15 (version 1) and install it again. Main corrections in PG5 In the Device Configurator a correct subnet mask was idicated as invalid The analog outputs of a PCD3.M2130V6 could not be scaled correctly (German language only). When using the Device Configurator port 3 of a PCD3.M5340 could not be used as Master Gateway Help file for the Device Configurator added [...] :55:35 caused assembler error. EIB Library 2.5.312 - EIB Net/IP driver: multi-telegram buffer implemented. - FBox "EIB RCV Time+Date" improved Modbus(for PCD3 and PCD2.M5xx0 FW 1.10.16 and later), version
PCD1.M2120, PCD2.M5540 and all PCD3.Mxxxx with Ethernet connection. In PG5 1.4.301.15 the field MAC address remains empty. There is another way to get the MAC address of a PCD with Ethernet connection. Open the Online Debugger and enter D for Display and S for CPU-Status. This works for PCD1.M2120, PCD2.M5540 and all PCD3.Mxxxx with Ethernet connection Remark: There is a more [...] program with PG5 2.0.200 to a PCD1.M2xx0 or PCD3.Mxx60 the error message "Command not accepted: NAK response" can be returned by the downloader. Symptom When downloading a big program with PG
