PCD1.M2120, PCD2.M5540 and all PCD3.Mxxxx with Ethernet connection. In PG5 1.4.301.15 the field MAC address remains empty. There is another way to get the MAC address of a PCD with Ethernet connection. Open the Online Debugger and enter D for Display and S for CPU-Status. This works for PCD1.M2120, PCD2.M5540 and all PCD3.Mxxxx with Ethernet connection Remark: There is a more [...] program with PG5 2.0.200 to a PCD1.M2xx0 or PCD3.Mxx60 the error message "Command not accepted: NAK response" can be returned by the downloader. Symptom When downloading a big program with PG
patch 15 (version 1) and install it again. Main corrections in PG5 In the Device Configurator a correct subnet mask was idicated as invalid The analog outputs of a PCD3.M2130V6 could not be scaled correctly (German language only). When using the Device Configurator port 3 of a PCD3.M5340 could not be used as Master Gateway Help file for the Device Configurator added [...] :55:35 caused assembler error. EIB Library 2.5.312 - EIB Net/IP driver: multi-telegram buffer implemented. - FBox "EIB RCV Time+Date" improved Modbus(for PCD3 and PCD2.M5xx0 FW 1.10.16 and later), version
patch 15 (version 1) and install it again. Main corrections in PG5 In the Device Configurator a correct subnet mask was idicated as invalid The analog outputs of a PCD3.M2130V6 could not be scaled correctly (German language only). When using the Device Configurator port 3 of a PCD3.M5340 could not be used as Master Gateway Help file for the Device Configurator added [...] :55:35 caused assembler error. EIB Library 2.5.312 - EIB Net/IP driver: multi-telegram buffer implemented. - FBox "EIB RCV Time+Date" improved Modbus(for PCD3 and PCD2.M5xx0 FW 1.10.16 and later), version
patch 15 (version 1) and install it again. Main corrections in PG5 In the Device Configurator a correct subnet mask was idicated as invalid The analog outputs of a PCD3.M2130V6 could not be scaled correctly (German language only). When using the Device Configurator port 3 of a PCD3.M5340 could not be used as Master Gateway Help file for the Device Configurator added [...] :55:35 caused assembler error. EIB Library 2.5.312 - EIB Net/IP driver: multi-telegram buffer implemented. - FBox "EIB RCV Time+Date" improved Modbus(for PCD3 and PCD2.M5xx0 FW 1.10.16 and later), version
) on Saia PCD® COSinus systems (PCD3, PCD2.M5, PCD1.M2 and PCD2.M480). This phenomenon is based on the internal mechanism how the firmware assigns the port. It has not been observed before the usage of [...] ). The new FBox library for Modbus "Modbus SBC Version" which takes advantage of the Modbus implementation directly in the Saia PCD® COSinus firmware. Available for PCD1.M2, PCD3 and PCD2.M5 with firmware [...] .engiby.ch ) and supported also by PCD systems previous to the PCD3, PCD2.M5xxx and PCD1.M2xxx families (e.g. PCD2.M1x0, PCD2.M480 or PCD1.M1xx). Remarks In order to use the firmware implementation
supporting the "Secure S-Bus Data mode"). Saia PCD® COSinus based systems (PCD2.M480, PCD2.M5xx0 and PCD3) are not concerned. Reason The reason for this behavior is that the PCD/PCS does not correcly [...] ! How long does it take to load the supercap? (FAQ #100707) The PCD1.M110, PCS1 and PCD3 are equipped with a supercap [...] Saia PCD® COSinus systems (PCD3, PCD2.M5 and PCD2.M480) this problem doesn't occur
supporting the "Secure S-Bus Data mode"). Saia PCD® COSinus based systems (PCD2.M480, PCD2.M5xx0 and PCD3) are not concerned. Reason The reason for this behavior is that the PCD/PCS does not correcly [...] ! How long does it take to load the supercap? (FAQ #100707) The PCD1.M110, PCS1 and PCD3 are equipped with a supercap [...] Saia PCD® COSinus systems (PCD3, PCD2.M5 and PCD2.M480) this problem doesn't occur
standard IEC 61131-3 Order details PCD3.M6893 IEC 61131-3 high-level language programming PLC PCD8.QronoX-SSA Service and Support agreement on an annual base for two registered users Access to the Saia PCD QronoX Portal PCD8.QronoX-Tbase IEC 61131-3 Online programming workshop, 40h compact knowledge Documentation Features of Saia PCD [...] Compatible with PCD3 I/O system Full Modular I/O System Reuse of robust and proven modules Easy upgrade existing installations
