can be used in I/O slots 0 to 3 of PCD2.M5 or I/O slot 0 or 1 on a PCD2.M4 or PCD1.M2 [...] PCD2.F2xxx Serial communication modules to be placed in I/O slots 0..3 [...] Product Index PCD2 Fxxx: Comm modules F2xxx General
can be used in I/O slots 0 to 3 of PCD2.M5 or I/O slot 0 or 1 on a PCD2.M4 or PCD1.M2 [...] PCD2.F2xxx Serial communication modules to be placed in I/O slots 0..3 [...] Product Category Programmable controller PCD2: CPUs, flat design Fxx: Comm modules F2xxx: Serial comm
segment display of the PCD2.F510 is not used it can be replaced by other PCD2.F5xx modules. For PCD2.M110 only: port 2 is only available for terminals mounted on the PCD. Port 3 is never available [...] Product Category Programmable controller PCD2: CPUs, flat design Fxx: Comm modules F [...] PCD2.F5xx Serial communication modules Documentation
segment display of the PCD2.F510 is not used it can be replaced by other PCD2.F5xx modules. For PCD2.M110 only: port 2 is only available for terminals mounted on the PCD. Port 3 is never available [...] Product Index PCD2 Fxxx: Comm modules F5xx General [...] PCD2.F5xx Serial communication modules Documentation
01 0271 0022 fexible cable Note: If the bautrates isn't greater than 187,5 bautes (for ex. Profi S-Bus with PCD3.M3xx / PCD7.D7xx) you can use other more advantegeous cable, especially [...] 7.T160 D-Sub 9pin on PCD Port 2 on PCD3.M3 and M6 A=RxD /TxD-N green D pin 8 D B=RxD /TxD-P red D/ pin 3 /D Example for the port 3 of the PCD3.M5540 as Serial-S-Bus RS485 connection (Serial-S-Bus) between PCD3.M5540 port 3 (S-Net D-Sub used as RS485 Serial-S-Bus) and PCD2.M5540 port 2 (connector block X3
COSinus FW 1.28.37 was released as maintenance version for the systems: - PCD1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668 . In June 2017: the COSinus FW 1.28.16 was introduced into production for the systems: - PCD1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668 . the BACnet and LonIP FW 1.28.16 was put into production [...] the following PCD's with 8 MB onboard firmware memory: PCD1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668 The table below does show the hardware dependencies in
.06.2019 #102031 - On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH [...] -Bus? 21.12.2018 #102028 - Why do the 0 to 10 V analog outputs of the PCD3.W800 cards 'freeze' to a random value during operation and cannot be controlled by the user [...] )? 19.01.2018 #102014 - Why do the output of the PCD2/3.W6x5 not deliver stable signals
2xx0 - PCD2.M5xx0 - PCD3.Mxxx0 Solution Please update the fimrware to the version to version 1.16.27 available on the support site. The user name (often an email address) contains one of the [...] Ethernet port and the PCD2.M5540 are able to send emails. But sending e-Mails is not only depending on the CPU itself. The PCD3 systems equipped with an Ethernet port and the PCD2.M554x support [...] limited depending on the system from which the message is sent (PCD7.F655 or PCD3/PCD2.M5). Please refer to the table below for the maximum size of the EMail elements: Element
2xx0 - PCD2.M5xx0 - PCD3.Mxxx0 Solution Please update the fimrware to the version to version 1.16.27 available on the support site. The user name (often an email address) contains one of the [...] Ethernet port and the PCD2.M5540 are able to send emails. But sending e-Mails is not only depending on the CPU itself. The PCD3 systems equipped with an Ethernet port and the PCD2.M554x support [...] limited depending on the system from which the message is sent (PCD7.F655 or PCD3/PCD2.M5). Please refer to the table below for the maximum size of the EMail elements: Element
2xx0 - PCD2.M5xx0 - PCD3.Mxxx0 Solution Please update the fimrware to the version to version 1.16.27 available on the support site. The user name (often an email address) contains one of the [...] Ethernet port and the PCD2.M5540 are able to send emails. But sending e-Mails is not only depending on the CPU itself. The PCD3 systems equipped with an Ethernet port and the PCD2.M554x support [...] limited depending on the system from which the message is sent (PCD7.F655 or PCD3/PCD2.M5). Please refer to the table below for the maximum size of the EMail elements: Element
