higher PCD FW: Firmware 1.28.11 or higher PCD2.F2150 / PCD3.F215: Firmware 1.04.04 or higher These version including BACnet Stack Rev 14, automatic mapping and symbol creation and BACshark tool for .ede file generation Only the plant controllers PCDx.Mxx60 and the PCD1.M2220-C15 are compatible to connect the PCD7.LRxx room controllers [...] Product Category Configurable room controller PCD7.LRxx: BACnet Room Controller
PCD7.R55x Flash memory module with file system Documentation Good to know The module PCD7.R551M04 is no longer required as since firmware 1.16.27 it is possible to write the backup to a file system, see FAQ101622 . The PCD3 [...] Product Category Programmable controller PLC Accessories Memory Modules PCD
PCD7.R56x PCD3.R56x BACnet modules for Saia PCD2.M5xx0 / PCD3 [...] memory modules and on the INTFLASH (if available). These are: PCD1.M2xxx (INTFLASH) PCD2.R6000 PCD3.R550, PCD3.R551, PCD3.R561 PCD3.R600 PCD7.R550, PCD7.R551, PCD7.R561 INTFLASH of a PCD3 Compact or a PCD1.M
are connected to PCD3.Mxxx or PCD2.M480 PLC's over Profi S-Bus, the terminal loses the communication after some time and get even frozen. This problem is corrected in the new boot, FW and driver. The PCD8.D81 V 5.09 is needed , the attached files have to be copied in it (see procedure below). It is also necessary to update the PCD3.Mxxx and PCD2.M480 FW with the version PCD3.Mxxx_023.blk / PCD2.M [...] PCD7.D761 Boot V 2.5 PCD7.D763 Boot V 3.6 The booter version is visible during the programme download, in the PCD8.D81W Download window! Finally download the
are connected to PCD3.Mxxx or PCD2.M480 PLC's over Profi S-Bus, the terminal loses the communication after some time and get even frozen. This problem is corrected in the new boot, FW and driver. The PCD8.D81 V 5.09 is needed , the attached files have to be copied in it (see procedure below). It is also necessary to update the PCD3.Mxxx and PCD2.M480 FW with the version PCD3.Mxxx_023.blk / PCD2.M [...] OS do not allow the access to COM-ports in the way which is used for DOS. Use an operating system which is based on DOS (DOS, WIN 3.11, Windows 95 or Windows 98) instead. PCD7.D8 is a
standard IEC 61131-3 Order details PCD3.M6893 IEC 61131-3 high-level language programming PLC PCD8.QronoX-SSA Service and Support agreement on an annual base for two registered users Access to the Saia PCD QronoX Portal PCD8.QronoX-Tbase IEC 61131-3 Online programming workshop, 40h compact knowledge Documentation Features of Saia PCD [...] Compatible with PCD3 I/O system Full Modular I/O System Reuse of robust and proven modules Easy upgrade existing installations
standard IEC 61131-3 Order details PCD3.M6893 IEC 61131-3 high-level language programming PLC PCD8.QronoX-SSA Service and Support agreement on an annual base for two registered users Access to the Saia PCD QronoX Portal PCD8.QronoX-Tbase IEC 61131-3 Online programming workshop, 40h compact knowledge Documentation Features of Saia PCD [...] Compatible with PCD3 I/O system Full Modular I/O System Reuse of robust and proven modules Easy upgrade existing installations
standard IEC 61131-3 Order details PCD3.M6893 IEC 61131-3 high-level language programming PLC PCD8.QronoX-SSA Service and Support agreement on an annual base for two registered users Access to the Saia PCD QronoX Portal PCD8.QronoX-Tbase IEC 61131-3 Online programming workshop, 40h compact knowledge Documentation Features of Saia PCD [...] Compatible with PCD3 I/O system Full Modular I/O System Reuse of robust and proven modules Easy upgrade existing installations
supporting the "Secure S-Bus Data mode"). Saia PCD® COSinus based systems (PCD2.M480, PCD2.M5xx0 and PCD3) are not concerned. Reason The reason for this behavior is that the PCD/PCS does not correcly [...] ! How long does it take to load the supercap? (FAQ #100707) The PCD1.M110, PCS1 and PCD3 are equipped with a supercap [...] Saia PCD® COSinus systems (PCD3, PCD2.M5 and PCD2.M480) this problem doesn't occur
supporting the "Secure S-Bus Data mode"). Saia PCD® COSinus based systems (PCD2.M480, PCD2.M5xx0 and PCD3) are not concerned. Reason The reason for this behavior is that the PCD/PCS does not correcly [...] ! How long does it take to load the supercap? (FAQ #100707) The PCD1.M110, PCS1 and PCD3 are equipped with a supercap [...] Saia PCD® COSinus systems (PCD3, PCD2.M5 and PCD2.M480) this problem doesn't occur
