inputs of a module PCD2/3.W525 could perturbate an other input of the same module Module PCD2/3.W525 are not designed as other analog input modules (as PCD2/3.W340 or W200 for example). Particularities [...] of R/F/T/C/DB/Text with FRAM technology (the data are retained in a de-energised state) 2 I/O Slots for PCD2 I/O modules (maximum of 39 I/O's directly on a PCD PCD1.M2200-C15) 1 Slot for 'M' [...] ) New features All PCD's: When push button is pressed while power on then do not update FW from FS in order to execute a delete all. PCD1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD
This firmware is used in the PCD, Smart RIO and MB Panel production and the PCD's, RIO's and MB Panels are shipped with this firmware. The BACnet and LonIP firmware is also included in the package. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx or 1.26.xx or newer to a not compatible PCD.
points. The PCD2 can be expanded by means of plug-in memory modules to become a Lon IP® or BACnet®-enabled controller. The PCD2 has communication interfaces such as USB, Ethernet, RS-485 and Automation [...] ? (FAQ #102040) Due to a production error it's possible that PCD2.M5540 which have been produced in 2020 may contain a [...] MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that
Product Category Programmable controller PCD2: CPUs, flat design C1x0: Extension units General FAQ PCD2.A3xx Digital output modules (2 A
MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that [...] (CVE-2017-9628) All PCD's: The Modbus CSF CloseSRPort does not free the port then a open/SASI call give an error and the port does not work. PCD1.M2xx0 PCD1.M22x0 PCD2.M4x60: PCD can crash while power down [...] SRPort does not free the port then a open/SASI call give an error and the port does not work. PCD1.M2xx0 PCD1.M22x0 PCD2.M4x60: PCD can crash while power down when XOB 0 is programmed. PCD1.M2xx0 PCD
points. The PCD2 can be expanded by means of plug-in memory modules to become a Lon IP® or BACnet®-enabled controller. The PCD2 has communication interfaces such as USB, Ethernet, RS-485 and Automation [...] ? (FAQ #102040) Due to a production error it's possible that PCD2.M5540 which have been produced in 2020 may contain a [...] MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that
Documentation Good to know Minimal requirements for the PCD3.B160 are PG5 2.0.210 and firmware 1.16.52 on the PCD3. For accessing a PCD3.B160 the media mapping must be used (direct access to the I/Os from the DDC Suite is not supported). It is not possible to use the PCD3.B160 on a PCD3.T760. PCD3 / Bxxx How to configure a PCD3.B100 on a
Documentation Good to know Minimal requirements for the PCD3.B160 are PG5 2.0.210 and firmware 1.16.52 on the PCD3. For accessing a PCD3.B160 the media mapping must be used (direct access to the I/Os from the DDC Suite is not supported). It is not possible to use the PCD3.B160 on a PCD3.T760. PCD3 / Bxxx How to configure a PCD3.B100 on a
MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that [...] (CVE-2017-9628) All PCD's: The Modbus CSF CloseSRPort does not free the port then a open/SASI call give an error and the port does not work. PCD1.M2xx0 PCD1.M22x0 PCD2.M4x60: PCD can crash while power down [...] PG5 2.1 and 2.2 with E-Line S-Bus communication library < 1.2.110, why the S-Bus communication on the master PCD stops either after a certain time? (FAQ #102009)
The use of the HMI in bus protocol mode (RS485, "FTP" mode) on all PCD3 RS 485 ports (also on ports F2xx) must TEMPORARY be done with a special setting in the Advanced section of the SW Settings of the PG5.
