Documentation Good to know The basic module PCD7.R610 has a card holder for receiving the PCD7.R-MSD1024 Micro SD flash memory cards. This allows to use Micro SD Flash Card (1GByte) space-saving on the slots M1 and M2. The module can be used in the systems PCD1.M2/M0, PCD2.M5, PCD3.M and on the programmable MB panel PCD7.D457VT5F, PCD7.D410VT5F and PCD7.D412DT5F. Software The SBC SD File system Explorer 2.0.115.0 or later can be used for reading and writing data from the SD cards PCD7.R-SD256, PCD7.R-SD512, PCD7.R-SD1024 or uSD card PCD7.R-MSD1024 (used in PCD
The memory capacity for the user program of some PCD1 or PCD2 types can be extended by plugging an additional RAM chip. This FAQ lists the chip types which have been tested for the use on a PCD1 or a PCD2.M110, PCD2.M120 or PCD2.M150.
MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that [...] (CVE-2017-9628) All PCD's: The Modbus CSF CloseSRPort does not free the port then a open/SASI call give an error and the port does not work. PCD1.M2xx0 PCD1.M22x0 PCD2.M4x60: PCD can crash while power down [...] PG5 2.1 and 2.2 with E-Line S-Bus communication library < 1.2.110, why the S-Bus communication on the master PCD stops either after a certain time? (FAQ #102009)
recorded on the same form. 2. Send the form/s to: RMA@saia-pcd.com 3. You receive from us with e-mail a "RMA Form" which contains the following information: - RMA number - [...] invalidated for any reason. 2. Fill out the RMA form which is available at the bottom of this page. Send the RMA form to the regional SBC Customer Excellence (CX) team rma@saia-pcd [...] Information for the RMA proces: Return of defective items SBC products continuously perform at a very high level of reliability and as a result we are seeing a significant decrease in the need for test and
Due to a hardware problem on the first pilot versions of the PCD2.M5540 the RTS and CTS are crossed.
The booter versions up to version 0A2 can cause a register corruption after an power up of a PCD1.M1x5. The result of this problem can lead to wrong register contents after a short interruption of the power supply.
including English documentation version 2.02.17.17 (Scomm.dll version 2.0.150) This version runs together with PG5 V2.0.150 and 2.0.200
of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a [...] be loaded again). All PCD1.M2 and PCD2.M5 systems can be equipped with a firmware 1.16. and more recent [...] address bound to an IP address. Does a PCD generate gratuitous ARP telegrams? No, a PCD (e.g. a PCD3, a PCD2.M5xxx or a PCD equipped with a PCD7.F655) does not generate gratuitous ARP telegrams when
acquisition with Saia PCD controllers. 6 Videos available on a Youtube Playlist link - Energy data logging [1/6] - Integration custom counter [2/6] - S-Monitoring in HVAC application [3/6] - Use the energy data in your program [4/6] - Read data from other PCD in the network [5/6] - Datastructure and access to data via FTP [6/6] F-Box Library for PG5 2 [...] DNS on a router? (FAQ #101197) For connecting a PCD to the internet a router is required. In case this router "knows" a
acquisition with Saia PCD controllers. 6 Videos available on a Youtube Playlist link - Energy data logging [1/6] - Integration custom counter [2/6] - S-Monitoring in HVAC application [3/6] - Use the energy data in your program [4/6] - Read data from other PCD in the network [5/6] - Datastructure and access to data via FTP [6/6] F-Box Library for PG5 2 [...] DNS on a router? (FAQ #101197) For connecting a PCD to the internet a router is required. In case this router "knows" a
