minimal system requirements are: PG5 2.0.200 PCD Firmware 1.16.48 Modules supporting a firmware update: PCD2.F26xx PCD2.F27xx PCD3.F26x PCD [...] minimal system requirements are: PG5 2.0.200 PCD Firmware 1.16.48 Modules supporting a firmware update: PCD2.F26xx PCD2.F27xx PCD3.F26x PCD [...] to a bus and simplify the cable work significantly for HeaVAC applications.With PCD2.F2810 (for PCD1.M2xx0 and PCD2.M5) and PCD3.F281 modules (for PCD3 systems) a PCD system can be connected to the MP
The PCD2.M480, PCD2.M5xxx and PCD3.M5xxx can be used as an MPI server (Profi-S-Net port). As the mentioned PCD's only reply to MPI requests, this functionality can be used to connect for instance an intelligent terminal that supports MPI (an OP for instance), but other MPI functions like global data exchange or event driven communication are not supported.
A MPI-communication can be done over a serial RS 232 port of each PCD2.Mxx7
applications created with the Saia PG5® Web Editor5/Web Editor8 and stored on a Saia PCD® Device. The web-/IT interfaces are integrated in the basic system of all Saia PCD® controllers The integrated station [...] . In addition, also third party applications (via internal container) can be started from the MB app. If a URL Jump is made to a page which does not contain PCD Web-application (e.g. PDF document), a [...] 138.2: Modifications: - PCD Symbols containing offsets doesn’t work - FileViewer doesn’t work - Trouble when SBC MB App is used on PC’s with two screens
applications created with the Saia PG5® Web Editor5/Web Editor8 and stored on a Saia PCD® Device. The web-/IT interfaces are integrated in the basic system of all Saia PCD® controllers The integrated station [...] . In addition, also third party applications (via internal container) can be started from the MB app. If a URL Jump is made to a page which does not contain PCD Web-application (e.g. PDF document), a [...] 138.2: Modifications: - PCD Symbols containing offsets doesn’t work - FileViewer doesn’t work - Trouble when SBC MB App is used on PC’s with two screens
Modbus are automatically installed with PG5 2.0 but need to be licensed. For older PCD systems (such as the PCD2.M170 or the PCD1.M1x5) a pure FBox solution from the company Engiby exists [...] over Ethernet between a Saia PCD and a Siemens S7-314C-2 does not work correctly? (FAQ #101973) Situation: The PCD [...] Modbus on Saia PCD® Introduction Modbus is communications protocol based on a master/slave or client
The PCD3.M3xxx, PCD3.M5xxx and PCD3.M6xxx do feature different possibilities for using the port 10 (D-Sub connector) and port 2 (terminal block).
(or in case a PC is used, by interpreting the tracewin files). This phenomenon can be observed on PCD1.M1x5, PCD2.M150, PCD2/4.M170 and PCS1 systems (with firmware which are supporting the "Secure S [...] appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3). Symptom Instead of the [...] . Systems introduced before 2003: All PCD1, PCD2 (except PCD2.M480), PCD4 and PCD6 as well as PCS1 classic contollers do have a baud rate limitation of 38.4 kB/s on each serial port. For
(or in case a PC is used, by interpreting the tracewin files). This phenomenon can be observed on PCD1.M1x5, PCD2.M150, PCD2/4.M170 and PCS1 systems (with firmware which are supporting the "Secure S [...] appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3). Symptom Instead of the [...] . Systems introduced before 2003: All PCD1, PCD2 (except PCD2.M480), PCD4 and PCD6 as well as PCS1 classic contollers do have a baud rate limitation of 38.4 kB/s on each serial port. For
