The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.
-
PCD7.D120
-
Remote display (obsolete)
-
Documentation
Software
FB's for PG4 users, refer to the manual 26/799 for more details
PG5 base library dollar version 2.2.003 including FBoxes for PCD7.D120
| Software | PG5 base library dollar version 2.2.003 including FBoxes for PCD7.D120 |
Use setup extra files to install. Note: $-versions are not available for everybody.
| EN |
|
|
.sco | 0.00 MB | Download |
Good to know
The PCD7.D120 together with the adaptation frame 4 108 4836 0 were discontinued by the end of 2011.
Repair service for the PCD7.D120 is guaranteed until end of 2015.
The PCD7.D120 displays are not fully compatible with the PCA2.Dxx:
Mechanical: the dimension of the cut out is smaller than the D12, so if you have to replace an existing PCA2.D12 with a PCD7.D120, you have to use an adaptation frame for cut out 24.5 x 48.5 mm (type 4 108 4836 0)
Features: The PCD7.D120 is a 6-digit LED display with decimal point; the PCA was 4-digit only
Programming: The IL code and FBoxes for the PCA2.Dxx are not compatible with the PCD7.D120. To use the PCD7.D120, you need FBoxes contained in PG5 starting from version 1.1.100. Earlier versions of PG3/4/5 are not supported.
