General
FAQ

How can the micro SD memory card on the circuit board of a PCD controller be replaced?

FAQ #102067

In some cases, it is necessary to replace the micro-SD memory card (uSD) of the PCD.

This FAQ describes how to replace the micro-SD memory card (uSD) which is mounted on the PCD controller's PCB (printed circuit boards)

The attached .pdf describes how to replace the micro-SD memory card (uSD) used on the PCB of the PCD

Related Files:

Related FAQs:

How to know whether the circuit board of the PCD is fitted with a Swissbit micro-SD memory card? (FAQ #102070)
What is stored on the micro-SD memory card which is used on the circuit board of the PCD? (FAQ #102068)
How to copy csv-Files and Webeditorproject files which are stored on the Intflash of a PCD, if you are replacing an internal micro-SD memory card which is used on the circuit board of the PCD? (FAQ #102069)

Categories

PCD1

PCD2

PCD3

PCD3 / Mxxx

PCD7 / D4xx (MB Panel)

PCD1 / M2xx0

PCD7 / D4xxE (Energy Manager)

PCD2 / M4x60

PCD7 / D443WT5R

PCD7 / D4xxxT5F (pWeb Panel)

Last update: 04.12.2023 13:09

First release: 21.11.2023 09:08

Views: 5

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.