Het spijt ons. Uw verzoek kon niet worden verwerkt.

Product Index Axx: Energy meters

Saia PCD® Energy Meters

Energy meters are available in two compact and robust industrial designs (single phase and 3-phase meters). These two designs are the base for a wide product range.

  • 1-ph. S0-Interf.
    3-ph. S0-Interf.
  • 1-ph. S-Bus Interf.
    3-ph. S-Bus Interf.
  • 1-ph. M-Bus Interf.
    3-ph. M-Bus Interf.
  • 1-ph. Modbus Interf.
    3-ph. Modbus Interf.

CC Control Components

  • What are the maximum energy consumption values for Energy meters and Energy Managers/ E-controllers? (FAQ #101899)
  • Label and schema of PCD7.T162 are incorrect on housings produced before week 22 of 2011 (FAQ #101615)
  • How to configure the S-Bus address on a ALE3? (FAQ #101476)
  • What are the replacement possibilities for the CXE312 and CXE322? (FAQ #101462)
  • Which energy meter of the ALE3 line do have pushbuttons? (FAQ #101387)
  • CXG 201: Why is the screen flashing? (FAQ #101160)
  • Why can't I start the software "CXControl"? (FAQ #101150)
  • CXD(counter/tachometer) operating instructions are not up to date! (FAQ #100921)

CC Control Components / AAE3 / ALE3 / AWD3

  • Does the printed serial number on the energy meter match the one read through the communication interface? (FAQ #101835)
  • What is new in the SBC M-Bus library 2.7.006? (FAQ #101604)
  • Why is it not possible to communicate over S-Bus with the S-Energy meter (ALD1/ALE3/AWD3)? (FAQ #101591)
  • Why does the FBox for the AWD3 display a wrong current in case a current transformer is used? (FAQ #101528)
  • The cos phi values aren't correct on phase 2 and 3 on AWD3D5WS00CxA00 energy counter! (FAQ #101505)
  • How to configure the S-Bus address on a ALE3? (FAQ #101476)
  • Why is the "SASI S-Bus Master" FBox red when communicating with S-Energy Meters? (FAQ #101469)
  • Why is the "current" format of the FBox for the AWD not identical for all phases? (FAQ #101443)
  • Why is the partial counter of tariff 1 not correctly displayed in the FBox for ALE3 Energy meters? (FAQ #101432)
  • AWD3/ALE3/ALD1 energy meter with serial interface (for example S-Bus): What happens if the direction of the current is inverted (from Lx output to Lx input)? (FAQ #101406)
  • AWD3/ALE3/ALD1 energy counter with serial interface (for example S-Bus): Is it possible to know whether the reactive power is generated from capacitive or inductive load? (FAQ #101405)
  • Which energy meter of the ALE3 line do have pushbuttons? (FAQ #101387)
  • Manufacturers of current transformers which could be used with AWD3 and AWD1 energy meter (FAQ #101161)
  • Can I change the physical variable displayed on a ALE3 or a AWD3? (FAQ #101146)

CC Control Components / AAD1 / AAE1 / ALD1

  • Does the printed serial number on the energy meter match the one read through the communication interface? (FAQ #101835)
  • How to test the precision of a single phase energy meter with communication as it does not have S0 nor LED output? (FAQ #101771)
  • What is new in the SBC M-Bus library 2.7.006? (FAQ #101604)
  • Why is it not possible to communicate over S-Bus with the S-Energy meter (ALD1/ALE3/AWD3)? (FAQ #101591)
  • AWD3/ALE3/ALD1 energy meter with serial interface (for example S-Bus): What happens if the direction of the current is inverted (from Lx output to Lx input)? (FAQ #101406)
  • AWD3/ALE3/ALD1 energy counter with serial interface (for example S-Bus): Is it possible to know whether the reactive power is generated from capacitive or inductive load? (FAQ #101405)

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download