Het spijt ons. Uw verzoek kon niet worden verwerkt.

Important: This FAQ has been automatically translated by our software program. The original FAQ can be found here. SBC provides this information without liability for its correctness or functionality and does not assume liability being complete or correctly translated.

Ondersteunde baudrates en protocollen op een PCD2.M480

FAQ #100355

De seriële poorten van de PCD2.M480 staat toe om te communiceren tot 115 kB/s.

 

The PCD2.M480 does support the following baudrates:

Serial communication (Serial-S-Bus, Mode C)

   Baud rate (kB/s)
PCD2
Socket
Module
1200
2400
4800
9600
19200
38400
57600
76800
115200
Port #
0
On-board
X
X
X
X
X
X
X
X
X
1APCD7.F1xx

X

X

X

X

X

X

    
1
A
PCD7.F121
X
X
X
X
X
X
X
X
X
2
B1
PCD2.F5xx
X
X
X
X
X
X
3
B1
PCD2.F5xx
X
X
X
X
X
X
4
B2
PCD2.F5xx
X
X
X
X
X
X
5
B2
PCD2.F5xx
X
X
X
X
X
X
6
On-board
X
X
X
X
X
X
X
X
X


Restrictions:

  • For the ports 2,3  and 4,5 following combination of baud rates are not allowed on the same  PCD2.F5xx:
    19,2 kBaud and 38,4 kBaud
  • On the port 1 it’s not possible to use the S-Bus party Master mode.
  • Mode D is not supported.

Profibus

   Supported baudrates Supported protocols
PCD2
Socket
Module
93,75 kB/s
187,5 kB/s
500 kB/s
1,5 MB/s
3 MB/s
6 MB/s
12 MB/s
Profi-S-Bus
Profi-S-IO Master or Slave
Profibus-DP Master
Profibus-DP Slave
Port #
8
B2
PCD7.F750
X
X
X
X
X
X
X
X
X
9
B1
PCD7.F750
X
X
X
X
X
X
X
X
X
10
On-board
X
X
X
X
X
X
X


Remark
:
Multi protocol on the same port is supported.
Example:
On the port 10 it’s possible to act at the same time as Profi-S-Bus Master and Slave, Profi-S-IO (Master or Slave) or Profibus-DP Slave.

Restriction:

If the port 10 is used as Profi-S-IO Master, then it’s not possible to act at the same time as Profi-S-IO Slave or Profbius-DP Slave on the port 10.

Ethernet TCP/IP

   Baudrate
PCD2
Socket
Module
10MB
100MB
Port #
8
B2
PCD7.F650
X
X
9
B1
PCD7.F650
X
X


Remark
:
Multi protocol on the same port is supported.
Example: On the port 8 it’s possible to act at the same time as Ether-S-Bus Master and as Ether-S-Bus Slave

Categories

PG5 2.0 / Profibus DP

Communication / Ether-S-Bus

PG5 2.0 / Profi-S-Bus

PG5 2.0 / Serial-S-Bus

PG5 2.0 / Profi-S-I/O

PCD2 / M48x

Last update: 27.05.2015 22:37

First release: 02.05.2005 12:39

Views: 14468

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download