If the MB-panel is connected to the RS 485 port the default timeout has to be adjusted for low baudrates
In general No, except if you use the Modbus2 library.
It was not possible before the MP-Bus library 2.5.300 which was distributed with PG5 1.4.300.
Inputs / Outputs < 256 are in the process image and are read cyclic. The access can be per example: L IW 128 (Load Input Word 128) Inputs / Outputs > 256 are not in the process image and can only b
It's possible to update a PG5 project which include also Graftec files from PG5 2.1.210 to PG5 2.1.310 and compile and download the project in to the PCD. But after making some changes in the Graftec
This problem was related to a font unsed by the HMI-editor 1.4.170 which was not supported by every Windows system.
An EPROM was created in the same way as EPROMS for Classic PCDs are created, but it doesn't work.
The memory requirement of a "HDLog to File" FBox (log in csv format) is calculated as follows: Possible records = 50% of memory capacity (in bytes) / required characters per record (in bytes). Furthe
In case a controller of the DDC Suite has a setpoint which is far below (or higher, depending on the usage of the controller) the current actual value and the set point is modified, the output value i
Updating the program/configuration of a PCD does not necessarily require the whole PG5 installation. By the use of the "S-Online Tools" and the functionality "Create Self-downloading file", a PCD can
