If one updates in the Browser his HDLog Trends using the “Reload” button, the new historic trends are well loaded. Nevertheless, the focus of the view is not automatically set to the right, most act
During the build the system symbol S.CPU.PcdType is missing and this can create this error. This means that the PG5 Device Configurator didn't save this symbol!
In the FBox 'HVC Configuration' (L60x-1 HVC Cfg) in the FBox family 'RoomControler PCD7_60x V2' it is possible to modify the set point correction from the default value 0.5°K (step) to another value f
In june 2006 a new communication module for IP communication has been officialized (PCD7.F655). Because this new module is based on the same hardware as the module PCD7.F650, such a module can be upgr
Yes, this is possible with firmware version 1.10.15 and later.
Due to incompatible communication parameters used by the Omnio "RS232/485 to EnOcean" converters the FBox library version 1.0.0 is not working in every situation with the converter from Omnio.
While launching the FBox Builder the validity of the license for PG5 (and for the FBox Builder) is checked. If this validation fails, the FBox Builder cannot be started.
There are error messages displayed for each old FBox that it should be replaced.
Yes, this is possible. In the modem settings there is the option "auto disconnect after x minutes". Just below there is a radio button with the choices "when idle" or "always, do not reconnect"
The lenght of the symbolic name of the PCD text variable which is used in the 'dir' field of the F-Box 'HDLog File 3.0' and does point to the location of stored csv file is limited to 39 characters. I
