After a few houres or days the PCD3 goes in HALT with a BUS ERROR.
How can I uninstall by manual ?
The device configurator gives an error when a card with 16 digital inputs or outputs is configured on base address 240 because the address 255 is reserved for the hardware watchdog!
In case that two IP addresses are assigned to the same Ethernet card (Ethernet port) on a PC, it is possible that the communication does only work on one of the two IP addresses. This problem is cause
There is a "power down reset" that can be activated in the Modem 14 Driver FBox. This hardware reset will the modem power down and up again.
Due to a bug in PG5 2.0.150.400 (PG5 2.0 with patch 4 or patch 4a) the original projects from PG5 1.4 are modified during the import of the project.
In some cases the setup of the PG5 Suite V2.0.210 aborts with the error with number -1603 and the setup fails.
When using the modules PCD3.W800 and A810 on T760, it is necessary to know the address mapping which may be different that when they are used on a PCD3.Mxxx processor or on a LIO module (PCD3.Cxxx)!
