As described in FAQ 101479 the version 2.6.xxx of the Engiby libraries is required for PG5 2.0.150 (PG5 2.0 SP1). This FAQ contains the link to download the libraries (in order to have a fast solution
The used of the internal flag S.HMI.ALACLEAR works but there is always 1 alarm left in Buffer and the only way to clear it is to download the user programme again. This situation is caused due to a sp
There is a an item called "Set station active" in the communication buffer which default value is 0. This causes the OPC server to disable the connection to the concerned PCD(s). The result is a commu
Analysing Serial-S-Bus communication can be done in several ways, depending on the focus of analysis (what shall be analysed; the telegrams on the wire, the requests sent by a PC software or the signa
The PCD3 Compact (PCD3.M2xxx) is available in the Network configurator from PG5 2.0 but not in the one from PG5 1.4 300.
PCS1 with hardware version E (or newer) with firmware 0A0 (or newer) have 50 non-volatile E² registers. Older PCS1 systems have only 5 E² registers.
No, the PCD4.C225 is not supported by a PCD2.M5xx0 CPU. Due to the higher processing speed of the PCD2.M5 (compared to e.g. a PCD2.M150) it can not be guaranteed that the I/O modules are correctly acc
An energy meter ALE3 or AWD3 does always show the consumed energy (as physical variable) on the LCD display on its front. It is also possible to temporarily display e.g. the instantaneous power measur
Upgrade from PG5 2.0.210 to PG5 2.0.220 does not let go online with a Project done with a previous version: Message "The program needs to be rebuilt and download" is displayed. The same happens wit
In firmware 03B and 03C an S-Bus broadcast telegram will block the communication interface until the next reboot of the PCD.
