If you have build, download a program into the PCD and when you try to open the graftec file you get the message: Everithing is OK ! Can't open the active transition. This a Graftec bug which happen
In case more than 32 PCDs are to be connected to a PC using serial connections (with one COM port for every PCD station) PG5 needs to be configured to allow more than 32 COM ports to be used by the SC
With firmware 1.12.01 for the VGA panel (PCD7.D4xxV) it is not possible anymore to choose the numeric keyboard as default. At every power off/on this setting is lost.
This error message can occur for example when you move in the symbol editor of Fupla the symbol folder of one DDC Suite FBox to another folder.
Yes, since the S-Web editor 5.14.10 (currently in pilot phase) it's possible to transfer container variable information from one web application to another web application.
If a new FBox library is installed in the default PG5 path, they won't be available in a DDC Suite project, because in this case, the FBox libraries are part of the project itself.
If the PCD2.F2610 or PCD3.F261 Dali communication modules are used: There is no need to use a Tridonic interface. The whole DALI configuration is done with the Dali F-Box over the F2610/F261 modules
When using the SBC.Net WebConnect on a PC or an eXP Panel you have to "terminate" the WebConnect task every time you shut down the PC.
The SBC.Net WebConnect does provide an own driver for S-Bus Communication for most of the communicaiton methods (Ether-S-Bus, Serial-S-Bus and Profi-S-Bus). However, in some cases the SComm driver is
