For Fancoil applications, the fan output is always needed and the correct handling of this output is very important. The cooling/heating valves shall not open if the fan is not switched on. For
While older patches for PG5 1.4 required post-installation steps (lauching an executable after the installer for the patch has finished) this is no longer necessary for patch 10 and later. In order to
Due of the housing of the connector of the PCD2.K1.. extension cable a minimum distance of 6 cm is required between the PCD2.M… CPUs and PCD2.C1.. extension rack, if the extension rack PCD2.C1.. is pl
In order to achieve a high and constant data throughput with S-Bus, the following guidelines can be helpful for the programmer of S-Bus communication.
As big as possible... In relation to the use of the Web Editor, it is important to choose the highest possible RAM Disk size of the PCD Web Server. A too small RAM Disk size may lead to the message "
The latest firmware versions for PCS1 require a boot version of 090 or more recent to be downloaded. PCS1 with hardware version E (original FW version 0A1, produced after April 2004) are already equip
This phenomenon could be caused by a missing power supply or if the current consumption of the I/O modules exceeds the maximum supply of the extension module. A missing jumper inside the PCD3.C200 can
Yes, PG5 1.4 is compatible with Microsoft Windows Vista , Windows Server 2008, Windows 7 and Windows 8 (with the exception that the BACnet Configurator is only supporting the 32bit versions of the abo
The last Version is V1.2 (1989). Please read the attachment document.
