The outputs of a PCD2.W525 or a PCD3.W525 need to be configured correctly. If this is the case, it is possible that a problem in the FBox leads to the fact that the outputs are not written correctly.
There were some firmware modifications made for the counter/tachometer CXD. Since the operating instruction (delivered together with the product) were not updated, some of the sequences are different
In PG5 2.0.150 sometimes the following error message appears on execution of "Copy user program to flash": "Failed to copy to/from flash. Check Flash Memory or card is fitted".
When trying to copy a smart Ethernet RIO station from the menu "Edit" --> "Copy RIO" in the Saia PG5® RIO Network Configurator the following error message appears if the RIO contains a Web Editor pro
There has been the possibility to equip a (now discontinued) PCD6 with an Ethernet module. However, as the PCD6 system has been discontinued, also the Ethernet module (PCD7.F651) for the PCD6 systems
If a modem is installed on port 3 and the default standby mode "S-BUS PGU" is choosen in modem driver f-box the error: "Stanby mode OFF must be used with reduced handshake (port 3)." "Fatal Error 20:
This error appears if resources used in the HMI Editor do not exist in the FUPLA global symbol list.
It is possible to convert all the variable from a S-Bus driver to Ether S-Bus driver if an existing project has to be used on another terminal type (e.g. PCD7.D786 convert to PCD7.D786ET)!
Yes it is possible to be Master on the Profibus DP Master modul PCD7.D750 and Slave on the Profi S-I/O port. Otherwise there is a bug in PG5 which generates an error on compiling.
