After the installation of the version 1.4.300 of the "JCI N2-Bus" FBox library, it is no longer possible to build the Saia PG5® project but the error message "Protected library used: _SBC_JCI_N2BUS" i
As those fupla librairies aren't used by all customer there aren't installed automatcaly in fupla editor during PG5 installation. They have to be installed manually from PG5 installation CD.
Some history entries introduced in new firmware versions can't be found in the Online Debugger Help nor in the online help of the Online Configurator.
A short list of the most common messages one may find in the PCD history when BACnet fails (e.g. Bnt FAIL TL00001).
In case the "PCD input reference" is used in the BACnet configuration and a persistent value is written in runtime over BACnet (with BACnet firmware 1.16.41), the PCD might no longer be able to read t
In the adust window of the FBox "Modem Driver 14" the status of the modem is shown if PG5 is online with the PCD. The modem status is directly shown as string for better readability. This FAQ contains
On energy counter AWD3D5WS00C3A00 and AWD3D5WS00C2A00, the cos value on phase 1 ist correct but not on phase 2 and 3. All other values are read correctly.
Traditionally terminals were connected to the HMI Editor via RS 232 with Handshake, which is still the safest way. If more than one terminal has to be put on the same line or when the terminals are at
No it isn't possible to display a register content or a sub text (with the instruction $Rxxxx or $Lxxxx) in the alarmlist of the S-Web editor.
