Build economical, industrial Ethernet networks with both linear and star structures
In July 2012 the firmware 1.16.69 was introduced into production for the systems PCD1.M2xx0, PCD2.M5xx0, PCD3.Mxxx0 and PCD3.Mxx60. This FAQ lists the main differences between this firmware and the
No, one master can only handle PCD3.T665/T666 or PCD3.T660 Rio's. It's not possible to mix PCD3.T665/T666 and PCD3.T660 on the same master PCD. The PCD3.T660 is no more available. If existing PCD
When trying to open the symbol editor, Rio Configurator, Device Configurator or Web Editor Project this error message is displayed:
After the update of the E-line library version 1.1.100 on PG5 2.2.1xx all Rio Fboxes need to be updated (yellow Fboxes). Once the update is done, some errors does occurs. The manual mode does not wor
In some cases it is necessary to re-load a Web Project project on a PCD7.D4xxx MB Panel (e.g. if the project stored on the PCD has been modified). This can of course be done by powering off and on the
Yes, the PCD7.W600 analogue input module is supported on the PCD2.M4x60 since the hardware version C of the PCD2.M4x60.
Due of an error in the hardware the first series (hardware version A and B) of the PCD2.M4x60 is not able to use the PCD7.W600 analogue input module. The error was fixed in the hardware version C of
Due of an error in the hardware and the firmware the first series (hardware version A and B) of the PCD2.M4x60 is not able to use the analog/ISDN or GMS modem which is connected to the RS232 of the PC
