The message "File not found!" together with the name of the HTML file is shown when connecting to the PLC via Ether-S-Bus, Profi-S-Bus or Serial-S-Bus. When connecting via HTTP direct (Ethernet) everything works fine!
PG5 programmable room controllers - 2 interfaces RS-485 for S-Bus or Modbus, Sylk Bus 230 VAC power supply, large housing, RTC, 2 analogue outputs, 4 triac outputs, 4 relays, 1 LED output, 6 universal inputs
PG5 programmable room controllers - 2 interfaces RS-485 for S-Bus or Modbus, Sylk Bus 230 VAC power supply, large housing, RTC, 2 analogue outputs, 4 triac outputs, 4 relays, 1 LED output, 6 universal inputs
Product Category Energy monitoring Energy Meter With Serial-S-Bus ALD1 1 [...] Single-phase energy meters with Serial-S-Bus interface Documentation EPLAN product macros, DWG and DXF files can be found here . FBoxes for reading the Energy meters with Fupla Certificates MID Certificates can be found in the certificates section Good to know The FBox library version 2.6.176 for the ALD/ALE/AWD with Serial-S-Bus can be
Order Number Standard Version: ALD1D5FS00A2A00 MID Version: ALD1D5FS00A3A00 Sealing caps: 4 104 7420 0 Main features - Single-phase energy meter, 230 VAC 50 Hz - Direct measurement up to 32 A - Display of active power, voltage and current - S-Bus Interface to query the data - Reactive power and cos PHI available through interface - Up to 254 meter can be connected to the S-Bus Interface - 7-digit display - Lead seal possible with cap as accessory - Accuracy class B according to EN50470-3, accuracy class 1 according to IEC62053-21
Yes, the sign of reactive power does indicate the type of reactive power load. If the reactive power is generated from a capacitive load then the sign will be negative. If the reactive power is gene
If the current direction is inverted, for example if a PV installation does supply back the current, then the active power and the cosine Phi of the concerned phase on the AWD3/ALE3/ALD1 will have a n
