CPU base units for 4 plug-in I/O modules PCD3 modular with CAN bus interface 1 MB of user memory with Run/Halt switch Backup option with PCD7.R500 Flash Card, USB port for PG5 max. 1023 digital I/Os, 2 interrupts, Web-Server, RS-232, RS-485 for Profi-S-Net/MPI/S-Bus
CPU base units for 4 plug-in I/O modules PCD3 processor unit with CAN bus interface and Ethernet TCP/IP, web and FTP server, file system, CPU with 1 MByte user program, backup option with PCD7.R500 Flash card, clock (RTC), data protection 1-3 years, USB port for PG5, up to 1024 I/O, 2 interrupts, RS-232, 2x RS-485 for Profi-S-Net/MPI/S-Bus
CPU base units for 4 plug-in I/O modules PCD3 processor unit with CAN bus interface and Ethernet TCP/IP, web and FTP server, file system, CPU with 2 MByte user program, 1 MByte RAM extension memory, 128 MByte user Flash memory with file system, clock (RTC), data protection 1-3 years, USB port for PG5, up to 1024 I/O, 2 interrupts, RS-232, 2x RS-485 for Profi-S-Net/MPI/S-Bus
PCD3 processor unit with 2 Ethernet TCP/IP, web and FTP server, file system, CPU with 2 MByte user program, 1 MByte SRam extension memory, 128 MByte user Flash memory with file system, clock (RTC), data protection 1-3 years, USB port for PG5, up to 1024 I/O, 2 interrupt inputs, RS-485 for Profi-S-Net/MPI/S-Bus
-protocols are disabled by default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) PG5 projects made with precedent version of PG5 2.1 are upward compatible [...] default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) - The user has to turn on the appropriate IP protocols deliberately in the Device [...] Update Manager Web Editor 8.0 Project Generator - Excel-Import Improvements of Fupla - Cyclical transmission of S-Bus telegrams - HTTP file transfer library - Display the history of Adjust
mounted on a PCD3.T360 RIO will be reset on bus failure (or if the master is in STOP or HALT). This is the general defualt behaviour on Profubus DP networks that was overtaken for the Profi S-I/O networks [...] Software / Firmware / Tools EPLAN Product macros, DWG and DXF files can be found here. Softwaretool for printing on the Labeling-Strips for PCD3-Modules: S [...] displayed in the Configurator). This text is not correct; it should be "0..4095" instead of "0..1023". The GSD file revision of the PCD3.T760 in the S-Net Configurator is 1.12 or earlyer: Reason
firmware (for that you can "download all" after updating the firmware. Note that you'll need the USB port after the update (as your S-Bus address might be gone). Alternatively, you can also copy the [...] PCD3 On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s possible to use BACnet on both ports ETH1 or ETH
. If you use the default standby mode S-BUS PGU you have to choose full handshake. Normally the handshake is on default. Only in this special case you have to change it to full [...] while sending an S-Bus telegram (e.g. missing port assignation or invalid data array or media) Invalid mathematical operation (e.g. division by zero or value overflow after a multiplication) Index [...] the Online Debugger!). Hint: Also have an eye on the SASI FBoxes you used as well as on the HMI Settings tab. The port doesn't exist The SASI text isn't valid S-Bus support isn't enabled in
. If you use the default standby mode S-BUS PGU you have to choose full handshake. Normally the handshake is on default. Only in this special case you have to change it to full [...] while sending an S-Bus telegram (e.g. missing port assignation or invalid data array or media) Invalid mathematical operation (e.g. division by zero or value overflow after a multiplication) Index [...] the Online Debugger!). Hint: Also have an eye on the SASI FBoxes you used as well as on the HMI Settings tab. The port doesn't exist The SASI text isn't valid S-Bus support isn't enabled in
. If you use the default standby mode S-BUS PGU you have to choose full handshake. Normally the handshake is on default. Only in this special case you have to change it to full [...] while sending an S-Bus telegram (e.g. missing port assignation or invalid data array or media) Invalid mathematical operation (e.g. division by zero or value overflow after a multiplication) Index [...] the Online Debugger!). Hint: Also have an eye on the SASI FBoxes you used as well as on the HMI Settings tab. The port doesn't exist The SASI text isn't valid S-Bus support isn't enabled in
