-100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON [...] sensor to the input E2 (and select in the config FBox its functionality as dew point): If the dew point has to be set over the S-Bus or in the "Room" FBox, then it has to be used in minimum the
Saia PCD® E-Line programmable modules Programmable E-Line input/output module for analogue applications supply 24 VAC/VDC 4 analogue inputs 12 bits 0…10 V, ±10 V, 0(4)…20 mA, Pt/Ni 1000, NTC, 0…2500 Ohm, 0…7500 Ohm, 0…300 kOhm 4 analogue outputs 12 bits, 0…10 V (4 mA max.) 2 interfaces: RS-485 (S-Bus), micro USB for PG5
Saia PCD® E-Line programmable modules Programmable E-Line input/output module for light and sunblind control supply 24 VAC/VDC 4 digital inputs 24 VAC/VDC 2 relay changeover 230 VAC / 30 VDC, 8 A, max. inrush current 15 A, incl. galvanically isolated current measurement 2 analogue outputs 12 bits, 0…10 V (3 mA max.) 2 interfaces: RS-485 (S-Bus), uUSB for PG5
E-Line digital input/output module manual override operating level for all outputs status LED for inputs and outputs supply 24 VDC - 24 digital inputs 24 VDC (source operation) - 6 relay normally open 230 VAC / 30 VDC, 4 A (resistive load) - 4 relay changeover 230 VAC / 30 VDC, 4 A (resistive load) - 1 interface RS-485 (S-Bus and Modbus)
E-Line digital input/output module manual override operating level for all outputs status LED for inputs and outputs supply 24 VDC - 4 digital inputs 24 VDC (source operation) - 6 relay normally open 230 VAC / 30 VDC, 4 A (resistive load) - 4 relay changeover 230 VAC / 30 VDC, 4 A (resistive load) - 1 interface RS-485 (S-Bus and Modbus)
-100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON [...] sensor to the input E2 (and select in the config FBox its functionality as dew point): If the dew point has to be set over the S-Bus or in the "Room" FBox, then it has to be used in minimum the
-100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON [...] sensor to the input E2 (and select in the config FBox its functionality as dew point): If the dew point has to be set over the S-Bus or in the "Room" FBox, then it has to be used in minimum the
-100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON [...] sensor to the input E2 (and select in the config FBox its functionality as dew point): If the dew point has to be set over the S-Bus or in the "Room" FBox, then it has to be used in minimum the
modifications listed in FAQ 101765 . The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ 101295 . The CAN FBox library version $2.6.102 can also be used [...] -protocols are disabled by default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) PG5 projects made with precedent version of PG5 2.1 are upward compatible [...] default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) - The user has to turn on the appropriate IP protocols deliberately in the Device
modifications listed in FAQ 101765 . The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ 101295 . The CAN FBox library version $2.6.102 can also be used [...] -protocols are disabled by default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) PG5 projects made with precedent version of PG5 2.1 are upward compatible [...] default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) - The user has to turn on the appropriate IP protocols deliberately in the Device
