PCD7.L4xx S-Bus remote I/O's, couplers [...] -100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON
Product Category Remote I/O PCD7.Lxxx S-Bus RIO L4xx: Analogue output RIO [...] PCD7.L4xx S-Bus remote I/O's, couplers [...] -100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room
Product Category Remote I/O PCD7.Lxxx S-Bus RIO L5xx: RIO Power supply [...] -100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON
-100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON [...] sensor to the input E2 (and select in the config FBox its functionality as dew point): If the dew point has to be set over the S-Bus or in the "Room" FBox, then it has to be used in minimum the
-100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON [...] sensor to the input E2 (and select in the config FBox its functionality as dew point): If the dew point has to be set over the S-Bus or in the "Room" FBox, then it has to be used in minimum the
-100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON [...] sensor to the input E2 (and select in the config FBox its functionality as dew point): If the dew point has to be set over the S-Bus or in the "Room" FBox, then it has to be used in minimum the
-100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON [...] sensor to the input E2 (and select in the config FBox its functionality as dew point): If the dew point has to be set over the S-Bus or in the "Room" FBox, then it has to be used in minimum the
-100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON [...] sensor to the input E2 (and select in the config FBox its functionality as dew point): If the dew point has to be set over the S-Bus or in the "Room" FBox, then it has to be used in minimum the
controller as S-Bus master, not read/write datas (inputs and outputs) from S-Bus slave devices via S-Bus? (FAQ #102029) The PCD7.LRxx-P5 IRM room controller can be operated on the RS485 interface as an S-Bus master. The PCD7.LRxx-P5 IRM room controller supports all S-Bus telegrams except the 2 telegrams: Read Input Write Output This means that it is not possible with the PCD7.LRxx-P5 IRM room controller, to read from the S-Bus Slave devices directly via S-Bus inputs and to write the
2? 29.01.2019 #102029 - Why can the PCD7.LRxx-P5 IRM room controller as S-Bus master, not read/write datas (inputs and outputs) from S-Bus slave devices via S-Bus [...] ? 16.11.2018 #102026 - Why the RS-485 S-Bus communication between the PCD master and the slave does fail sometime, if FW 1.28.20…1.28.33 is used [...] ? 29.11.2017 #102008 - PG5 2.1 and PG5 2.2 with S-Bus communication library 2.7.370, why the S-Bus communication on the master PCD stops either after a certain time or
