_Address_of_Panel (no login required). Using this interface it is possible: - Configure S-Bus connections for PCD systems which do not support http direct connections - Configure WebConnect as "proxy server" for [...] happen that the web-pages showed on the microbrowser of the PCD7.D5xxxTL Geode CE panel is frozen after some time. The values are no more update and it’s no more possible to make something [...] ! S-Web Editor 5.14.27 dependencies (FAQ #101273) Since the S-Web Editor version 5.13.00 many new functionalities have
advantageous PLC. The integrated S-Bus protocol (depending on the CPU type over serial line, TCP/IP, Profi-S-net and/or USB) allows connection(s) to a SCADA at a very low price level. The term "Saia PCD
Yes, the product Saia PCD® COSinus (PCD8.DNET-SUITE) does also contain the SBC S-Bus libraries (S-Bus Master and/or S-Bus Slave) based on the Microsoft .Net framework.
At the moment it is not possible to connect to several PCD's at the same time using the S-Bus USB channel.
Yes, bu the resources have to transfer from the S-Bus driver to the Ether-S-Bus driver. See the description below
Yes it is possible to deactivate the "secure S-Bus Data Mode".
Yes, it is possible to use the S-Net MPI port on the PCD3.M5xxx as free RS 485 port (S-Bus or Mode C per example).
There have been some restrictions concerning the usage of the S-Bus parity mode as master (SM1) on the PCD3.M and PCD2.M5 CPU. Since firmware version 1.10.51 these restrictions are eliminated.
An external device like scada or supervision sytem can know the status of the PCD (Run, Halt, Stop or Conditioanl Run) by using a special item of the S-Bus OPC-Server or by using a special S-Bus telegram.
Yes, it’s possible to connect up to 16 MP-Bus devices per MP-Bus line and the PCD supports the MP-Bus light protocol. Belimo has enhanced the functionality of the MP-Bus in that way that, in some conditions, it’s possible to connect up to 16 devices on the same MP-Bus.
