PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system, CPU with 2 MByte user program, 1 MByte SRam extension memory, 128 MByte user Flash memory with file system, clock (RTC), data protection 1-3 years, USB port for PG5, up to 1024 I/O, 2 interrupts, RS-232, 2× RS-485 for Profi-S-Net/MPI/S-Bus
PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system, CPU with 1 MByte user program, backup option with PCD7.R5xx/R610 Flash card, USB port for PG5, up to 1024 I/O, 2 interrupt inputs, RS-232, 2× RS-485 for Profi-S-Net/MPI/S-Bus, data protection 1-3 years
PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system, CPU with 512 KByte user program, USB port for PG5, up to 1024 I/O, 2 interrupt inputs, RS-485 for Profi-S-Net or S-Bus
PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system, CPU with 512 KByte user program, backup with on-board Flash memory, USB port for PG5, up to 1024 I/O, 2 interrupt inputs, RS-485 for Profi-S-Net or S-Bus
PLC with 512 KBytes of user memory, Backup with internal Flash memory, USB port for PG5 max. 64 digital I/Os (not expandable), 2 interrupts, Web-Server, RS-485 for Profi-S-Net or S-Bus, Ethernet TCP/IP
PLC with 128 KBytes of user memory Backup with internal Flash memory, USB port for PG5 max. 64 digital I/Os (not expandable), 2 interrupts, Web-Server, RS-485 for Profi-S-Net or S-Bus, Ethernet TCP/IP
Belimo MP-Bus interface module for up to 8 drives and 1 socket for PCD7.F1xxS module. PCD3 modules of type PCD3.F281 can be used on each slot "#0…3" of a PCD3 CPU and a PCD3 smart RIO.
. Why does my RS-232 S-Bus communication not work with the PCD2.F2xx0 and PCD3.F2xx module? (FAQ #101775) The RS-232 S-Bus [...] V020) it may be, that the S-Bus communication over converters (like modem or optical converters) to other devices does not work. The S-Bus communication works fine, if no converters are used in between. Also other communications protocols then S-Bus like "Mode C, Modbus" works fine on the PCD2.F2xx0 and PCD3.F2xx module (with and without converters in between). On the print screen below
firmware (for that you can "download all" after updating the firmware. Note that you'll need the USB port after the update (as your S-Bus address might be gone). Alternatively, you can also copy the [...] PCD3 On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s possible to use BACnet on both ports ETH1 or ETH
. Why the RS-485 S-Bus communication between the PCD master and the slave does fail sometime, if FW 1.28.20…1.28.33 is used? (FAQ #102026) It’s possible that the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could lead to the situation that for example the PCD S-Bus master don’t receive actual values from E-Line RIO’s or that the program download of a PCD program from the PC to a Slave PCD which is
