correctly. The EnOcean FBox library version 2.6.147 contains modifications listed in FAQ 101765 . The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ [...] transfer from the S-Bus driver to the Ether-S-Bus driver. See the description below Procedure for the conversion of a PCD8.D81W project Open the project and move the SBC S-Bus driver from ASP to MSP. Convert the panel from Vxxx rev 4 to VTxxx ETH. Drag and drop the driver "SBC Ethernet S-Bus" to the Ethernet port. Open the
Ocean FBox library version 2.6.147 contains modifications listed in FAQ 101765 . The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ 101295 . The CAN [...] -protocols are disabled by default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) PG5 projects made with precedent version of PG5 2.1 are upward compatible [...] default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) - The user has to turn on the appropriate IP protocols deliberately in the Device
correctly. The EnOcean FBox library version 2.6.147 contains modifications listed in FAQ 101765 . The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ [...] -protocols are disabled by default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) PG5 projects made with precedent version of PG5 2.1 are upward compatible [...] default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) - The user has to turn on the appropriate IP protocols deliberately in the Device
firmware. Solution At the moment the dynamic space has to be defined >=1000 and Timeout -> TS-Delay -> TN-Delay -> Break length ) If you want to disable the "Secure S-Bus Data mode" If you [...] ) Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399) There are several reasons to use the FBox "SASI S-Bus Extended" (see FAQ 101400). But there is a limitation that it is not possible to use this FBox for re-assigning a port as Gateway master port on Saia PCD® COSinus systems
correctly. The EnOcean FBox library version 2.6.147 contains modifications listed in FAQ 101765 . The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ [...] -protocols are disabled by default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) PG5 projects made with precedent version of PG5 2.1 are upward compatible [...] default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) - The user has to turn on the appropriate IP protocols deliberately in the Device
correctly. The EnOcean FBox library version 2.6.147 contains modifications listed in FAQ 101765 . The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ [...] transfer from the S-Bus driver to the Ether-S-Bus driver. See the description below Procedure for the conversion of a PCD8.D81W project Open the project and move the SBC S-Bus driver from ASP to MSP. Convert the panel from Vxxx rev 4 to VTxxx ETH. Drag and drop the driver "SBC Ethernet S-Bus" to the Ethernet port. Open the
firmware. Solution At the moment the dynamic space has to be defined >=1000 and Timeout -> TS-Delay -> TN-Delay -> Break length ) If you want to disable the "Secure S-Bus Data mode" If you [...] ) Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399) There are several reasons to use the FBox "SASI S-Bus Extended" (see FAQ 101400). But there is a limitation that it is not possible to use this FBox for re-assigning a port as Gateway master port on Saia PCD® COSinus systems
correctly. The EnOcean FBox library version 2.6.147 contains modifications listed in FAQ 101765 . The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ [...] transfer from the S-Bus driver to the Ether-S-Bus driver. See the description below Procedure for the conversion of a PCD8.D81W project Open the project and move the SBC S-Bus driver from ASP to MSP. Convert the panel from Vxxx rev 4 to VTxxx ETH. Drag and drop the driver "SBC Ethernet S-Bus" to the Ethernet port. Open the
firmware. Solution At the moment the dynamic space has to be defined >=1000 and Timeout -> TS-Delay -> TN-Delay -> Break length ) If you want to disable the "Secure S-Bus Data mode" If you [...] ) Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399) There are several reasons to use the FBox "SASI S-Bus Extended" (see FAQ 101400). But there is a limitation that it is not possible to use this FBox for re-assigning a port as Gateway master port on Saia PCD® COSinus systems
There are firmware depending differences in the handling of the Serial-S-Bus communication diagnosic flags TDIA and RDIA. Those flags are refreshed continuously by older FW versions but not by the Saia PCD® COSinus Classic PCD firmware (used for PCD2.M480 and PCD3 controllers).
