Your search returned 639 results

201. BIM - AWD3D5WS00C3A00

     Relevance:

      

     14%

     Three-phase energy meter with LCD display - SBC S-Bus interface, 5…1'500 A, 1 tariff - display of active power, voltage and current - Reactive power per phase or total, available via M-Bus interface - according to MID directive

202. BIM - AWC3D5WS00C3A00 - 1...300 A

     Relevance:

      

     14%

     Three-phase energy meter with LCD display Main features - SBC S-Bus interface, 1…300 A, 1 tariff - display of active power, voltage and current - Reactive power per phase or total, available via M-Bus interface - according to MID directive OBSOLETE

203. PCD7.F180S - Belimo MP-Bus interface module,

     Relevance:

      

     14%

     Characteristics of the MP-Bus protocol - No special cable or line termination resistors - Costs saved due to reduced expenditure on cabling and easy handling - Simple commissioning and maintenance - Uncomplicated method for integrating and exchanging actuators - Compatible with BELIMO® actuators using MFT/MFT2 technology

204. Example for Ether-S-Bus communication ¦ Level: easy

     Relevance:

      

     14%

     including basic IP explications. File contains several projects, please unzip the file before importing into PG5. PG5 version 2.0.150

205. PCD2.M480: SM1 (S-Bus Master Parity) on Port 1 is not supported!

     Relevance:

      

     14%

     There are some restriction on the PCD2.M480, the port 1 as Master Port doesn't support parity mode. Note: The "Break mode" is not supported on the PCD2.M480!

206. Ether-S-Bus communication does not work if two addresses are assigned to the same Ethernet card

     Relevance:

      

     14%

     In case that two IP addresses are assigned to the same Ethernet card (Ethernet port) on a PC, it is possible that the communication does only work on one of the two IP addresses. This problem is cause

207. How to avoid disturbances on the bus when connecting a PCD8.K120 (Profi S-Link) cable

     Relevance:

      

     14%

208. AWD3/ALE3/ALD1 energy meter with serial interface (for example S-Bus): What happens if the direction of the current is inverted (from Lx output to Lx input)?

     Relevance:

      

     14%

     If the current direction is inverted, for example if a PV installation does supply back the current, then the active power and the cosine Phi of the concerned phase on the AWD3/ALE3/ALD1 will have a n

209. AWD3/ALE3/ALD1 energy counter with serial interface (for example S-Bus): Is it possible to know whether the reactive power is generated from capacitive or inductive load?

     Relevance:

      

     14%

     Yes, the sign of reactive power does indicate the type of reactive power load. If the reactive power is generated from a capacitive load then the sign will be negative. If the reactive power is gene

210. Why do I have communication problems with the PCD7.L1xx, 2xx, 3xx, 4xx when using the "S-BUS Station" F-Box?

     Relevance:

      

     14%

     This RIO modules need some time to synchronize the baudrate and establish communication.