This product is outphased.
The S-Bus address of an ALE3 with Serial-S-Bus interface can be configured by the following procedure.
controllers with S-Bus and Modbus Programmable room controller, 2 interfaces RS-485 for S-Bus or Modbus, Sylk Bus 230 VAC power supply, large housing, RTC
We have received the information that on an application it was not possible to access with PG5 version 2.1.420 over serial line (RS232) in PGU or S-Bus mode to the PCD and the message: Error 99: Can’t open port comx was shown in the debugger. The reason why it was not possible to access the PCD was the fact, that the com port was used from another application at the same time. The application which have used the same serial port was the software SoMachine from Schneider Electric. Solution: To be able to go online in this situation, it’s necessary to stop the software SoMachine from
Yes, the product Saia PCD® COSinus (PCD8.DNET-SUITE) does also contain the SBC S-Bus libraries (S-Bus Master and/or S-Bus Slave) based on the Microsoft .Net framework.
In order to achieve a high and constant data throughput with S-Bus, the following guidelines can be helpful for the programmer of S-Bus communication.
The S-Bus Data-Mode was the last implemented S-Bus protocol. Therefore not all PCD's and not all firmwares are supporting the Data-Mode.
Product Category Archive Remote I/O PCD1.T240 S-Bus RIO General FAQ The requested software / document is no longer marketed by Saia [...] . PCD1.T240 Remote I/O for S-Bus (obsolete) Documentation Good to know Not all PCD2.xxx modules are
The "secure S-Bus Data Mode" has been introduced in order to clearly identify a Serial-S-Bus response telegram as answer to a certain request telegram (by introducing a sequence number). This FAQ explains the difference between the "standard S-Bus Data Mode" and the "secure S-Bus Data Mode".
Yes it is possible to deactivate the "secure S-Bus Data Mode".
