delete all. PCD1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668: Enhancement for HTTP server to transparently support sending compressed files. Main corrections [...] that the RIO is not commission and no goes no more in ‘data exchange mode’ until the PCD reboots. All PCD's: When RIO name is not in upper case the RIO file is not updated until a restart is executed. All PCD's: When RIO file is downloaded with download changed RIO file then RIO file is not sent to RIO until a restart is executed. All PCD's: Ethernet Frame Padding Information Leakage fixed
these files can be downloaded from the PCD3 page. For the PCD3.W525, the description of the diagnostic information is written on the FAQ 101552 [...] for freezing the analog outputs of the PCD3.W800 module so that we can inform you if your application is affected by the problem. This FAQ will be dated as soon as we have new information [...] address 240). On all other slots the modules work correctly. Solution This problem is solved with hardware version A or C and newer of the PCD2.W6x5 or PCD3.W6x5 respectively
these files can be downloaded from the PCD3 page. For the PCD3.W525, the description of the diagnostic information is written on the FAQ 101552 [...] for freezing the analog outputs of the PCD3.W800 module so that we can inform you if your application is affected by the problem. This FAQ will be dated as soon as we have new information [...] address 240). On all other slots the modules work correctly. Solution This problem is solved with hardware version A or C and newer of the PCD2.W6x5 or PCD3.W6x5 respectively
and DXF Files can be found here For labelling the I/O the Device Configurator from PG5 2.0 can be used [...] for freezing the analog outputs of the PCD3.W800 module so that we can inform you if your application is affected by the problem. This FAQ will be dated as soon as we have new information [...] address 240). On all other slots the modules work correctly. Solution This problem is solved with hardware version A or C and newer of the PCD2.W6x5 or PCD3.W6x5 respectively
and DXF Files can be found here For labelling the I/O the Device Configurator from PG5 2.0 can be used [...] for freezing the analog outputs of the PCD3.W800 module so that we can inform you if your application is affected by the problem. This FAQ will be dated as soon as we have new information [...] address 240). On all other slots the modules work correctly. Solution This problem is solved with hardware version A or C and newer of the PCD2.W6x5 or PCD3.W6x5 respectively
sent faster than with FW 001. Note that this only concernes programs written in IL which are not prepared to receive the characters quickly (or more than one per cycle) With the HMI Editor no problem [...] message "Error 31: C:\Program Files\SAIA-Burgess\PG5 1_4\Libs\Std\sfupdis5.srx: Line 323: Syntax error" is shown and the build fails. Reason The error message is shown because of an error on the SFup base library which is distributed with PG5 1.4.300. Solution To fix the error please install the library S-Fup Base Library version 2.6.100 or higher (installer file "S-Fup Base Library
sent faster than with FW 001. Note that this only concernes programs written in IL which are not prepared to receive the characters quickly (or more than one per cycle) With the HMI Editor no problem [...] message "Error 31: C:\Program Files\SAIA-Burgess\PG5 1_4\Libs\Std\sfupdis5.srx: Line 323: Syntax error" is shown and the build fails. Reason The error message is shown because of an error on the SFup base library which is distributed with PG5 1.4.300. Solution To fix the error please install the library S-Fup Base Library version 2.6.100 or higher (installer file "S-Fup Base Library
(general) Documentation Product specific documentation Single-phase energy meters 3-phase energy meters EPLAN product macros, DWG and DXF files can be found here . [...] install the "SBC version" or the "Engiby version" but not both in parallel; this could lead to inconsistent file combinations [...] firmware problem it isn't possible to use the following S-Bus addresses for the energy meter ALD1, ALE3 and AWD3: 107, 153, 226 and 238. Symptom If one of the addresses 107, 153, 226 and
(general) Documentation Product specific documentation Single-phase energy meters 3-phase energy meters EPLAN product macros, DWG and DXF files can be found here . [...] install the "SBC version" or the "Engiby version" but not both in parallel; this could lead to inconsistent file combinations [...] firmware problem it isn't possible to use the following S-Bus addresses for the energy meter ALD1, ALE3 and AWD3: 107, 153, 226 and 238. Symptom If one of the addresses 107, 153, 226 and
: Use default encoding when export / import CSV file. FBox libraries and Firmware version: This version contains all the FBox libraries and Firmware version that have been release [...] ensure download in run with the downloadable in run marked FBoxes Web Editor 8: In template handling, allow overwriting of template file and preserve original position of elements when [...] 1.W5300, corrections have been made on the module texts (Ni1000 L&S ...) and in the configuration of digital inputs BACnet Configurator and Compiler: When importing CSV files, the character set is
