files generated by PG5 2.0.210 (and earlier) are missing the indication to be a floating point register (a {F} in the comment of the symbol). As this indication is missing, the OPC Server can not figure out it is a floating point value. Solution PG5 2.0.220 adds the indications again to the symbol files. If only an older version of PG5 2.0 can be used the following work-around could be applied [...] Possibility to export/import the header line on the export/import file. OPC Server version 2.02.17.20 (January 2014) New features Support of PG5 2.1.120 or later enhance the
losses. In case a telegram was lost (due to network problems) the transfer was interrupted by the PCD firmware. Because of the interruption the BACnet firmware was not notified, but it remained in a state [...] . Problem A configuration calculated with the old Excel sheet did not have the same current limitation for the CPUs. The same configuration is maybe rejected by the Device Configurator. Reason The reason is, that the maximal current on the V+ is depending on the charge on the 5V power supply. The Excel sheet did not take care of this dependency. This was leading to problems in very few cases. In the
losses. In case a telegram was lost (due to network problems) the transfer was interrupted by the PCD firmware. Because of the interruption the BACnet firmware was not notified, but it remained in a state [...] . Problem A configuration calculated with the old Excel sheet did not have the same current limitation for the CPUs. The same configuration is maybe rejected by the Device Configurator. Reason The reason is, that the maximal current on the V+ is depending on the charge on the 5V power supply. The Excel sheet did not take care of this dependency. This was leading to problems in very few cases. In the
Documentation Technical Reports Software / Tools EPLAN product macros, DWG and DXF files can be found here Softwaretool for printing on the Labeling-Strips for PCD [...] losses. In case a telegram was lost (due to network problems) the transfer was interrupted by the PCD firmware. Because of the interruption the BACnet firmware was not notified, but it remained in a state [...] . Problem A configuration calculated with the old Excel sheet did not have the same current limitation for the CPUs. The same configuration is maybe rejected by the Device Configurator. Reason The
. Reason: There is a problem in the PCD-Firmware. The PCD send the Information that the .csv file has been changed, but the MB-App does not notice it. Therefore the MB-App never does a reload by [...] .1 SEnergyReport Easy Update Tool PG5 Project and Firmware for S-Monitoring Application The 'Easy Update backup/recover package" does contain a *.sbcupd file. This file does contain the PCD firmware, the PG5 application program and the Web-project. The 'Easy Update Tool' is required to load the *.sbcupd file in to the PCD/MB-Panel. Difference between the Easy
. Reason: There is a problem in the PCD-Firmware. The PCD send the Information that the .csv file has been changed, but the MB-App does not notice it. Therefore the MB-App never does a reload by [...] .1 SEnergyReport Easy Update Tool PG5 Project and Firmware for S-Monitoring Application The 'Easy Update backup/recover package" does contain a *.sbcupd file. This file does contain the PCD firmware, the PG5 application program and the Web-project. The 'Easy Update Tool' is required to load the *.sbcupd file in to the PCD/MB-Panel. Difference between the Easy
. Reason: There is a problem in the PCD-Firmware. The PCD send the Information that the .csv file has been changed, but the MB-App does not notice it. Therefore the MB-App never does a reload by [...] .1 SEnergyReport Easy Update Tool PG5 Project and Firmware for S-Monitoring Application The 'Easy Update backup/recover package" does contain a *.sbcupd file. This file does contain the PCD firmware, the PG5 application program and the Web-project. The 'Easy Update Tool' is required to load the *.sbcupd file in to the PCD/MB-Panel. Difference between the Easy
” after the function Network –>Test Reason In the FW 1.26.xx there is a problem with the file update on the Flash cards, the bindings are only updates in the memory but the [...] the issue CVE-2017-9628 related to Ethernet frame padding information leakage. To avoid any problems in relation to this leakage we do recommend strongly to update to the latest Firmware 1 [...] delete all. PCD1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668: Enhancement for HTTP server to transparently support sending compressed files. Main corrections
” after the function Network –>Test Reason In the FW 1.26.xx there is a problem with the file update on the Flash cards, the bindings are only updates in the memory but the [...] the issue CVE-2017-9628 related to Ethernet frame padding information leakage. To avoid any problems in relation to this leakage we do recommend strongly to update to the latest Firmware 1 [...] delete all. PCD1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668: Enhancement for HTTP server to transparently support sending compressed files. Main corrections
shut down the panel. At next start the panel has a blue screen with some error messages. This problem occur only if an Ethernet cable is connected on the LAN Port A. The error comes from the driver of the LAN port. Solution The problem is corrected on driver 2.7.1.0 or higher. Copy the attached .exe file and execute the installation file for updating the driver. Of course HORM and EWF modes [...] .15.02 the applet tries to allocate too much memory. Workaround The task is to modify the size of the allocated memory used by the applet. This setting's defined in the *.html file of the Web
