protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later The single function codes (second line of the CSF call, "0" in the screenshot above) of the relevant libraries can be found [...] MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that [...] timeout occurs PCD7.D443WT5R does't reboot and stays locked. F irmware 1.28.11 (Arpil 2017) New features All PCD's: Support of BACnet Revision 14 Main corrections
protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later The single function codes (second line of the CSF call, "0" in the screenshot above) of the relevant libraries can be found [...] the firmware. Please update to version 0F1. Please note that PCD7.R400 modules delivered after April 2010 require the PCD2.M170 firmware version 0F0 or later. PCD3 LIO and PCD2.M17x: to use [...] MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that
protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later The single function codes (second line of the CSF call, "0" in the screenshot above) of the relevant libraries can be found [...] version PCD1.M1x5 0F0 PCD2.M150 0F0 PCD2.M170 0F0 PCD2.M480 1.08.21 PCD2.M5xx0 1.08.19 PCD3.Mxxx0 1 [...] 2.M150 A29040B-70F (AMIC) 4 502 7341 0 old: ST39SF040-70 (SST) old: AT49F040-70 (ATMEL) FW chip for PCD2.M127/157 (needs FW V3
protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later SF library 23: Energy Manager library SF library 25: LON FT library SF library 27: ELine library for ELine modules [...] version PCD1.M1x5 0F0 PCD2.M150 0F0 PCD2.M170 0F0 PCD2.M480 1.08.21 PCD2.M5xx0 1.08.19 PCD3.Mxxx0 1 [...] 2.M150 A29040B-70F (AMIC) 4 502 7341 0 old: ST39SF040-70 (SST) old: AT49F040-70 (ATMEL) FW chip for PCD2.M127/157 (needs FW V3
trace back a crash, a dump of the whole memory (SRAM, DRAM and FLASH) of a PCD can be done. This FAQ does apply to PCD1.M2, PCD2.M480, PCD2.M5xxx, PCD3 (including PCD3.Mxx60) and PCD7.D4xxxT5F [...] Tool.exe in the PG5 directory. PCD1.M2 PCD2.M480 PCD2.M5 PCD3 PCD3.Mxx60 (fast CPU) PCD7.D4xxxT5F (programmable MB-panels) Usage of the old stand alone tool SaiaDump.exe: This tool [...] .1.210 there is a dumptool.exe available in the PG5 installation directory which can be used instead of the SaiaDump.exe March 2013 (version 1.3.006) - Support also the PCD7.D4xxxT5F (programmable
protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later SF library 23: Energy Manager library SF library 25: LON FT library SF library 27: ELine library for ELine modules [...] with Name based Client BACnet: Rev14 does not allow high limit value below 5 on analogue input F irmware 1.28.37 (February 2019) New features All PCD’s: FW extension to [...] all bytes are transmitted when working with MC4 or MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on
Software / Tools EPLAN product macros, DWG and DXF files can be found here Softwaretool for printing on the Labeling-Strips for PCD3-Modules: Please use the Device Configurator from PG5 [...] firmware needs to be compatible to the PCD firmware. Please refer to the firmware page for a compatible package. Good to know To use PCD3.M3160, PCD3.M3360 or PCD3.M5360, PG5 [...] /calendar templates do not work BACnet: PCD3.M6860 no BACnet communication on ETH2 if router is used BACnet: Rev 4 not working with Name based Client BACnet: Rev14 does not allow high limit value below 5 on
Software / Tools EPLAN product macros, DWG and DXF files can be found here Softwaretool for printing on the Labeling-Strips for PCD3-Modules: Please use the Device Configurator from PG5 [...] firmware needs to be compatible to the PCD firmware. Please refer to the firmware page for a compatible package. Good to know To use PCD3.M3160, PCD3.M3360 or PCD3.M5360, PG5 [...] /calendar templates do not work BACnet: PCD3.M6860 no BACnet communication on ETH2 if router is used BACnet: Rev 4 not working with Name based Client BACnet: Rev14 does not allow high limit value below 5 on
Software / Tools EPLAN product macros, DWG and DXF files can be found here Softwaretool for printing on the Labeling-Strips for PCD3-Modules: Please use the Device Configurator from PG5 [...] firmware needs to be compatible to the PCD firmware. Please refer to the firmware page for a compatible package. Good to know To use PCD3.M3160, PCD3.M3360 or PCD3.M5360, PG5 [...] /calendar templates do not work BACnet: PCD3.M6860 no BACnet communication on ETH2 if router is used BACnet: Rev 4 not working with Name based Client BACnet: Rev14 does not allow high limit value below 5 on
protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later The single function codes (second line of the CSF call, "0" in the screenshot above) of the relevant libraries can be found [...] MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that [...] timeout occurs PCD7.D443WT5R does't reboot and stays locked. F irmware 1.28.11 (Arpil 2017) New features All PCD's: Support of BACnet Revision 14 Main corrections
