specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
. 1-ph. M-Bus Interf. 3-ph. M-Bus Interf [...] Which energy meter of the ALE3 line do have pushbuttons? (FAQ #101387) Versions ALE3D5F11KC3A00, ALE3D5F10KA2A00 and ALE3D5F10KA3A00 have push buttons. The ALE3D5F10KBXXXX doesn't have them. For other differencies please see the data sheet in the appropriate section of our website
protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later The single function codes (second line of the CSF call, "0" in the screenshot above) of the relevant libraries can be found [...] /s. In addition an UART of an PCD7.F5xx isn't able to handle 19.2 kB/s on one and 38.4 kB/s on the other port. But it is possible to assign both ports to 38.4 kB/s. Systems introduced since 2003 (PCD2.M480 and PCD3.xxxx): Due to faster hardware there are much higher baud rates possible on the serial ports (up to 115 kB/s)! There is only one restriction regarding UART sharing left: On a PCD7.F5
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
) Does M-Bus need a Full RS 232 interface? (FAQ #100416) No, on the PCD a reduced RS 232 can be used (PCD7.F520 / one part [...] Ethernet port (PCD7.F655 or the integrated Ethernet ports on the PCD1.M0/M2, PCD2.M5 and PCD3 and all Panels with Ethernet ports) are not designed for this purpose. Possible solution to connect PCD [...] The card PCD3.F281 does not work correctly with the library Belimo 2.5.300. (FAQ #100953) The library Belimo 2.5
Restrictions Protocol to read values of counters and other measurement equipment. The M-Bus master modules PCD2.F27x0 and PCD3.F27x can be use to connect M-Bus slaves (modules are available for PCD1.M2xx0, PCD2.M5xx0 and PCD3). For PCD2.M1x0 a system partner provides a solutions with a gateway to M-Bus, refer to www.engiby.ch for more details. In this case besides the FBox library (used in every case) an M-Bus converter is required, please refer to www.relay.de for instance. M-Bus master modules PCD2.F27x0 and PCD3.F27x, together
) Does M-Bus need a Full RS 232 interface? (FAQ #100416) No, on the PCD a reduced RS 232 can be used (PCD7.F520 / one part [...] Ethernet port (PCD7.F655 or the integrated Ethernet ports on the PCD1.M0/M2, PCD2.M5 and PCD3 and all Panels with Ethernet ports) are not designed for this purpose. Possible solution to connect PCD [...] The card PCD3.F281 does not work correctly with the library Belimo 2.5.300. (FAQ #100953) The library Belimo 2.5
commercially available products. PG5 2.0 communication program examples Level: easy En Ocean example M-Bus [...] ) Does M-Bus need a Full RS 232 interface? (FAQ #100416) No, on the PCD a reduced RS 232 can be used (PCD7.F520 / one part [...] Ethernet port (PCD7.F655 or the integrated Ethernet ports on the PCD1.M0/M2, PCD2.M5 and PCD3 and all Panels with Ethernet ports) are not designed for this purpose. Possible solution to connect PCD
