) Does M-Bus need a Full RS 232 interface? (FAQ #100416) No, on the PCD a reduced RS 232 can be used (PCD7.F520 / one part [...] Ethernet port (PCD7.F655 or the integrated Ethernet ports on the PCD1.M0/M2, PCD2.M5 and PCD3 and all Panels with Ethernet ports) are not designed for this purpose. Possible solution to connect PCD [...] The card PCD3.F281 does not work correctly with the library Belimo 2.5.300. (FAQ #100953) The library Belimo 2.5
Restrictions Protocol to read values of counters and other measurement equipment. The M-Bus master modules PCD2.F27x0 and PCD3.F27x can be use to connect M-Bus slaves (modules are available for PCD1.M2xx0, PCD2.M5xx0 and PCD3). For PCD2.M1x0 a system partner provides a solutions with a gateway to M-Bus, refer to www.engiby.ch for more details. In this case besides the FBox library (used in every case) an M-Bus converter is required, please refer to www.relay.de for instance. M-Bus master modules PCD2.F27x0 and PCD3.F27x, together
) Does M-Bus need a Full RS 232 interface? (FAQ #100416) No, on the PCD a reduced RS 232 can be used (PCD7.F520 / one part [...] Ethernet port (PCD7.F655 or the integrated Ethernet ports on the PCD1.M0/M2, PCD2.M5 and PCD3 and all Panels with Ethernet ports) are not designed for this purpose. Possible solution to connect PCD [...] The card PCD3.F281 does not work correctly with the library Belimo 2.5.300. (FAQ #100953) The library Belimo 2.5
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later The single function codes (second line of the CSF call, "0" in the screenshot above) of the relevant libraries can be found [...] /s. In addition an UART of an PCD7.F5xx isn't able to handle 19.2 kB/s on one and 38.4 kB/s on the other port. But it is possible to assign both ports to 38.4 kB/s. Systems introduced since 2003 (PCD2.M480 and PCD3.xxxx): Due to faster hardware there are much higher baud rates possible on the serial ports (up to 115 kB/s)! There is only one restriction regarding UART sharing left: On a PCD7.F5
. 1-ph. M-Bus Interf. 3-ph. M-Bus Interf [...] Which energy meter of the ALE3 line do have pushbuttons? (FAQ #101387) Versions ALE3D5F11KC3A00, ALE3D5F10KA2A00 and ALE3D5F10KA3A00 have push buttons. The ALE3D5F10KBXXXX doesn't have them. For other differencies please see the data sheet in the appropriate section of our website
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
