PCD3 / Wxxx On a PCD2.M4560 or PCD3.W5560, why [...] the 8 channels are not correct. ‘Power PCD’s’ are: PCD1.M2x20, PCD1.M2160, PCD1.M2220-C15 PCD2.M5540, PCD2.M5440, PCD2.M4160, PCD2.M4560 PCD3.Mxx60 To solve the issue, use and connect only up to 7 PT100 sensors to the PCD2/3.W220Z18 or do use a PCD2/3.W350 module, if all 8 PT100 are needed. On the ‘old’ PCD’s like PCD2.M170 or PCD3.M5540 the PCD internal
Why do I get wrong values when reading a PCD2/3.W340 with media mapping? (FAQ #101416) PCD2.M5xx0 and the PCD3 [...] by the media mapping for Ni1000 sensors which are connected to a PCD2.W340 or a PCD3.W340 installed on a PCD3 or a PCD2.M5 is not correct with firmware version 1.10.16. Reason The firmware did [...] . A PCD2.W3x0 conflicts with a PCD2.F2xx0 or a PCD2.R6000 on a PCD2.M5xxx (FAQ #101262) A hardware conflict on a PCD2.M
Why do I get wrong values when reading a PCD2/3.W340 with media mapping? (FAQ #101416) PCD2.M5xx0 and the PCD3 [...] by the media mapping for Ni1000 sensors which are connected to a PCD2.W340 or a PCD3.W340 installed on a PCD3 or a PCD2.M5 is not correct with firmware version 1.10.16. Reason The firmware did [...] . A PCD2.W3x0 conflicts with a PCD2.F2xx0 or a PCD2.R6000 on a PCD2.M5xxx (FAQ #101262) A hardware conflict on a PCD2.M
Why do I get wrong values when reading a PCD2/3.W340 with media mapping? (FAQ #101416) PCD2.M5xx0 and the PCD3 [...] by the media mapping for Ni1000 sensors which are connected to a PCD2.W340 or a PCD3.W340 installed on a PCD3 or a PCD2.M5 is not correct with firmware version 1.10.16. Reason The firmware did [...] On the master PCD the I/O mapping to Register 4096 until Register 16'383 for RIO-networks (Profibus DP or Profi-S-I/O) doesen't work on PCD3 and PCD2.M480 and PCD2.M5xx0 systems with firmware version 1
Why do I get wrong values when reading a PCD2/3.W340 with media mapping? (FAQ #101416) PCD2.M5xx0 and the PCD3 [...] by the media mapping for Ni1000 sensors which are connected to a PCD2.W340 or a PCD3.W340 installed on a PCD3 or a PCD2.M5 is not correct with firmware version 1.10.16. Reason The firmware did [...] . A PCD2.W3x0 conflicts with a PCD2.F2xx0 or a PCD2.R6000 on a PCD2.M5xxx (FAQ #101262) A hardware conflict on a PCD2.M
. PCD2 / M5xxx On a PCD2.M4560 or PCD3.W5560, why [...] Why do I get wrong values when reading a PCD2/3.W340 with media mapping? (FAQ #101416) PCD2.M5xx0 and the PCD3 [...] by the media mapping for Ni1000 sensors which are connected to a PCD2.W340 or a PCD3.W340 installed on a PCD3 or a PCD2.M5 is not correct with firmware version 1.10.16. Reason The firmware did
. PCD3 / Wxxx On a PCD2.M4560 or PCD3.M5560, why [...] measured PT100 temperature values of the 8 channels are not correct. ‘Power PCD’s’ are: PCD1.M2x20, PCD1.M2160, PCD1.M2220-C15 PCD2.M5540, PCD2.M5440, PCD2.M4160, PCD2.M4560 PCD3.Mxx60 To solve the issue, use and connect only up to 7 PT100 sensors to the PCD2/3.W220Z18 or do use a PCD2/3.W350 module, if all 8 PT100 are needed. On the ‘old’ PCD’s like PCD2.M170 or PCD3.M5540 the
. PCD3 / Wxxx On a PCD2.M4560 or PCD3.M5560, why [...] measured PT100 temperature values of the 8 channels are not correct. ‘Power PCD’s’ are: PCD1.M2x20, PCD1.M2160, PCD1.M2220-C15 PCD2.M5540, PCD2.M5440, PCD2.M4160, PCD2.M4560 PCD3.Mxx60 To solve the issue, use and connect only up to 7 PT100 sensors to the PCD2/3.W220Z18 or do use a PCD2/3.W350 module, if all 8 PT100 are needed. On the ‘old’ PCD’s like PCD2.M170 or PCD3.M5540 the
. PCD2 / M5xxx On a PCD2.M4560 or PCD3.W5560, why [...] Why do I get wrong values when reading a PCD2/3.W340 with media mapping? (FAQ #101416) PCD2.M5xx0 and the PCD3 [...] by the media mapping for Ni1000 sensors which are connected to a PCD2.W340 or a PCD3.W340 installed on a PCD3 or a PCD2.M5 is not correct with firmware version 1.10.16. Reason The firmware did
-Bus Data mode"). Saia PCD® COSinus based systems (PCD2.M480, PCD2.M5xx0 and PCD3) are not concerned. Reason The reason for this behavior is that the PCD/PCS does not correcly answer telegrams where [...] appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3). Symptom Instead of the [...] to the firmware supporting the according feature (see table below). System minimal FW PCS1.Cxxx 0E3 PCD1.M1x5 0E3 PCD2.M150 0E3
