Your search returned 700 results

371. PCD2.F2xxx

     Relevance:

      

     1%

     can be used in I/O slots 0 to 3 of PCD2.M5 or I/O slot 0 or 1 on a PCD2.M4 or PCD1.M2 [...] PCD2.F2xxx Serial communication modules to be placed in I/O slots 0..3 [...] Product Category Programmable controller PLC Accessories Communication Modules PCD

372. F2xxx

     Relevance:

      

     1%

     can be used in I/O slots 0 to 3 of PCD2.M5 or I/O slot 0 or 1 on a PCD2.M4 or PCD1.M2 [...] PCD2.F2xxx Serial communication modules to be placed in I/O slots 0..3 [...] Product Index PCD2 Fxxx: Comm modules F2xxx General

373. BACnet firmware; firmware used in production and maintenance firmware and supports BACnet Rev.9

     Relevance:

      

     1%

     BACnet FW and coresponding PCD FW for PCD1.M2xx0, PCD2.M4x60, PCD2.M5xx0, PCD3.Mxxx0, and PCD3.Mxx60. The FW =< 1.26.xx does support the BACnet standard revision 9 . Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx or 1.26.xx to a not compatible PCD.

374. Documents for ControlEdge PCD Builder

     Relevance:

      

     1%

     Documents Documents for ControlEdge PCD Builder General FAQ Documents concerning the IEC controller HPCD3.M6893 Programmable with the ControlEdge PCD Builder. CPU LIOs Communication Modules I/O modules Accessories

375. Why does the user program no longer work correctly after a restore from flash?

     Relevance:

      

     1%

     In case user program is restored from flash with a PCD3 or PCD2.M5540 with firmware 1.16.xx it is possible (depending on the device configuration) that the restored user program is not complete.

376. Why I get the error message "NAK response" during a program download (with PG5 SP2)?

     Relevance:

      

     1%

     On download of a big program with PG5 2.0.200 to a PCD1.M2xx0 or PCD3.Mxx60 the error message "Command not accepted: NAK response" can be returned by the downloader.

377. Why can't I read data from a CALEC aquametro energy master device?

     Relevance:

      

     1%

     In order to read data from "CALEC aquameter energy master" devices using the F27x modules (except PCD2.F2700 or PCD3.F270) the M-Bus FBox library 2.6.117 or later is required.

378. How to extend the amount of available Flags on a PCD?

     Relevance:

      

     1%

     With firmware version 1.14.23 of the PCD3.Mxxx0 and the PCD2.M5xx0 the amount of available flags has been increased from 8191 to 14335.

379. What are the differences between firmware 1.10.16 and 1.10.51?

     Relevance:

      

     1%

     In May 2010 the firmware 1.10.51 has been introduced into production for the PCD2.M5xx0 and the PCD3.Mxxx0. This FAQ lists the main differences between these versions.

380. What criterias are to be fulfilled for sending e-Mails from the PCD?

     Relevance:

      

     1%

     The PCD3 systems equipped with an Ethernet port and the PCD2.M5540 are able to send emails. But sending e-Mails is not only depending on the CPU itself.