Your search returned 700 results

321. W3xx: Analogue Inputs

     Relevance:

      

     1%

     . PCD3 / Wxxx On a PCD2.M4560 or PCD3.M5560, why [...] measured PT100 temperature values of the 8 channels are not correct. ‘Power PCD’s’ are: PCD1.M2x20, PCD1.M2160, PCD1.M2220-C15 PCD2.M5540, PCD2.M5440, PCD2.M4160, PCD2.M4560 PCD3.Mxx60 To solve the issue, use and connect only up to 7 PT100 sensors to the PCD2/3.W220Z18 or do use a PCD2/3.W350 module, if all 8 PT100 are needed. On the ‘old’ PCD’s like PCD2.M170 or PCD3.M5540 the

322. BIM - Analogue input modules PCD3.W210

     Relevance:

      

     1%

     Input/output modules for Saia PCD3 controllers Analogue input module, 8 channels, 10 bits, 0…20 mA (connector type A included)

323. Leaflet: PCD3M5xx7_HW-E

     Relevance:

      

     1%

     Saia PCD3.M5xx7 controller To use this product: OEM version Siemens® Step®7 programming tool is necessary.

324. BIM - Analogue output modules with galvanic isolation

     Relevance:

      

     1%

     Input/output modules for Saia PCD3 controllers Analogue output module with galvanic isolation, 4 channels, 10 bits, 0(4)...20 mA

325. Standby System - redundant automation solutions

     Relevance:

      

     1%

     The PCD3.M6880 Standby Controllers are for creating redundant automation solutions, to ensure the uninterrupted operation of systems and processes.

326. Order numbers for I/O cover and battery module cover

     Relevance:

      

     1%

     Is it possible to order the battery module cover (PCD3.M5xxx) and the I/O covers as spare parts?

327. How to use port 2 of a PCD3.M6xx7 as MPI port

     Relevance:

      

     1%

     Since the default MPI port is used for CAN or Profibus protocol on the PCD3.M6xx7 port 2 can be configured as MPI port

328. Why can't I change the Profi-S-Bus address on a PCD3.M6540 Port 2?

     Relevance:

      

     1%

     When using firmware version 1.08.23 the Profi S-Bus address can only be set one time on the PCD3.M6540 port 2.

329. What is the signification of the history entry "Resisters Fail"?

     Relevance:

      

     1%

     Due of a firmware error it's possible that on the history of the PCD3.M5340 there is an entry "Resistors Fail".

330. The PCD3.M6440 is not available in the Hardware Settings

     Relevance:

      

     1%

     In PG5 1.4.300 the new DP Master CPU without ethernet is not available, just the PCD3.M6540 can be selected