Your search returned 700 results

291. BIM - Analogue input modules - 12 bits

     Relevance:

      

     1%

     Analogue input modules for PCD3.M3xxx/..M5xxx/..M6xx0 Universal analogue input module, 8 channels, 12 bits, 0…10 V, 0…2.5 V, 0...20 mA, Pt/Ni 1000 (connector type A included)

292. BIM - Analogue input modules - 12 bits

     Relevance:

      

     1%

     Analogue input modules for PCD3.M3xxx/..M5xxx/..M6xx0 Universal analogue input module, 8 channels, 12 bits, 0…10 V, 0…2.5 V, 0...20 mA, Pt/Ni 1000 (connector type A included)

293. PG5 2.3 FBox library for the PCD3.M90 OEM Controller

     Relevance:

      

     1%

294. What is the article number of the orange 8-pol cage clamp connector (power supply connector) of the PCD3.M3/5 CPU?

     Relevance:

      

     1%

     The article (order) number is: 4 405 4995 0

295. How long does the SuperCap of the PCD3.M3xxx protect the media and RTC from being lost?

     Relevance:

      

     1%

     The resources (registers, flags, timers, counters etc) and possibly the user program and the text strings/DBs on a PCD3.M3xx0 are stored in RAM. To ensure that they are not lost and that the hardware clock (where present) continues to run when there is a power failure, the PCD3s are equipped with a buffer capacitor (SuperCap). Unfortunately the time has not been specified correctly in the manual 26/789 until version 11 of the manual. The duration is 4 hours and not 8 hours (after the SuperCap has been charged while 10 minutes).

296. How can the bus be terminated on Port 3 of a PCD3.M5340

     Relevance:

      

     1%

     On the PCD3.M5340 the bus termination can be activated in the PG5 Hardware Settings. A relay is switching the termination on or off.

297. How the RS485 bus is terminated if on a PCD3.M5340 the bustermination of the port 3 is activated?

     Relevance:

      

     1%

     On the PG5 device configuratior it’s possible to activate/deactivate the RS485/RS422 Bus termination of the port 3 (D-Sub #2 connector; RS485/RS422) of the PCD3.M5340.

298. Can I detect the CTS signal on port 3 of a PCD3.M5340 (in RS422 mode)?

     Relevance:

      

     1%

     Yes, this is possible with firmware version 1.10.15 and later.

299. Why is the Port 3 on the PCD3.M5340 not running correctly in RS 485 mode?

     Relevance:

      

     1%

     The first versions of the PCD3.M5340 controller have been delivered with a firmware that does not support the usage of the RS485 port on port 3.

300. Modbus for PCD3.M5xxx7 ¦ version 3.2

     Relevance:

      

     1%