Your search returned 700 results

231. How to configure the analogue inputs of a PCD3.M90 to be able to connect an NTC10k temperature sensor?

     Relevance:

      

     1%

     The analogue inputs of the PCD3.M90 CPU are able to handle NTC10k temperature sensors.

232. What's the max. data amount that can be exchanged between a SBC-NT PLC and a PCD3.T760?

     Relevance:

      

     1%

     Against the description of the exchangeable amount of data in the Profibus DP manual, a SBC-NT PLC (PCD3, PCD1.M2, PCD2.M5xxx, PCD2.M480) can communicate with a PCD3.T760 a maximum amount of 2'048 bytes.

233. What is the article number of the PCD3.M5/6 onboard battery module?

     Relevance:

      

     1%

     If you need to order separetly the onboard battery module of the PCD3.M5/6 CPU (which is normally part of the standard delivery of a PCD3.M5 or a PCD3.M6) please use the following article number: 4 639 4898 0

234. What are the differences between firmware 1.16.69 and COSinus FW 1.22.61?

     Relevance:

      

     1%

     In January 2014 the COSinus FW 1.22.28 was introduced into production for the systems PCD1.M0xx0, PCD1.M2xx0, PCD2.M5xx0, PCD3.Mxxx0, PCD3.Mxx60, PCD3.T665/T666 and PCD7.D4xxxT5F. The FW 1.22.61 is the latest maintenance firmware for PCD's with 4 MB firmware memory.

235. Why on a PCD3.M5/6xxx or a PCD2.M45xx the battery LED is switched on and the battery error message is activated in the application program after a new battery was inserted?

     Relevance:

      

     1%

     The battery voltage is checked in the battery module for undervoltage and overvoltage. New batteries have a too high voltage which causes the overvoltage limit to be exceeded.

236. BTL certificate: PCD3.M5xx0/M6xx0 with PCD7.R56x

     Relevance:

      

     1%

237. HMI Editor and PCD3.M_ or PCD2.M480: Wrong characters are display instead of value with Format #####!

     Relevance:

      

     1%

     When an element is configured as Integer with the format ##### (without dot) the value of the register is wrongly displayed on the terminal. This is a FW bug in the actual version of the PCD3.M_ and PCD2.M480.

238. Why do some M-Bus devices not work on all ports of a PCD2.M5 or a PCD3?

     Relevance:

      

     1%

     Some M-Bus devices (so far only observed on a MBus water counter from the company Allmess / Actris) are very sensitive against inter-character delays.

239. Firmware compatibility PCD6.M3 and PCD6.M1/2

     Relevance:

      

     1%

240. Can the S-Net MPI-Port on the PCD3.M5xx0 and on the PCD2.M5xx0 be used as standard RS-485 Port

     Relevance:

      

     1%

     Yes, it is implemented in the PCD3 with FW Version $12 or later. On the PCD2.M5xx0 it is supported with every firmware