The XOB 8 who is called when the firmware detects an invalid instruction (Invalid OPC) in the user program is no longer called on the systems Saia PCD® COSinus (PCD3, PCD2.M5, PCD2.M480).
connected to PCD3.Mxxx or PCD2.M480 PLC's over Profi S-Bus, the terminal loses the communication after some time and get even frozen. This problem is corrected in the new boot, FW and driver. The PCD8.D81 V 5.09 is needed , the attached files have to be copied in it (see procedure below). It is also necessary to update the PCD3.Mxxx and PCD2.M480 FW with the version PCD3.Mxxx_023.blk / PCD2.M480_$27 or [...] 01 0271 0022 fexible cable Note: If the bautrates isn't greater than 187,5 bautes (for ex. Profi S-Bus with PCD3.M3xx / PCD7.D7xx) you can use other more advantegeous cable, especially
Flash memory modules for PCD3.M3xxx/..M5xxx/..M6xx0 Flash memory module for LON-IP firmware with 128 MByte file system (for user program backup, web pages, ..), for PCD3.Mxxxx with Ethernet TCP/IP (plug-in onto I/O slot 0…3)
Flash memory modules for PCD3.M3xxx/..M5xxx/..M6xx0 Flash memory module for BACnet® firmware with 128 MByte file system (for user program backup, web pages, ..), for PCD3.Mxxx0 with Ethernet TCP/IP (plug-in onto I/O slot 0…3)
Analogue input modules with galvanic isolation for PCD3.M3xxx/..M5xxx/..M6xx0 Analogue local control module with 4 channels - 3 outputs 0...10 V with local control - 1 output 0..10 V without local control Connection with PCD3.K800 (connector type J included)
PCD3.M6xxx7 To use this product: OEM version Siemens® Step®7 programming tool is necessary.
Input/Output Simulator for PCD3.M/.T/.C (for ex. for test assembly or workshop models)
Input/Output Simulator for PCD3.M/.T/.C (for ex. for test assembly or workshop models)
Input/Output Simulator for PCD3.M/.T/.C (for ex. for test assembly or workshop models)
Interface cable PCD3.T760 web server to PC (length 2.5 m); RIO configuration cable
