Analogue output modules with galvanic isolation for PCD3.M3xxx/..M5xxx/..M6xx0 Analogue output module with galvanic isolation, 6 channels, 10 bits, ±10 V (connector type E included)
Analogue input modules with galvanic isolation for PCD3.M3xxx/..M5xxx/..M6xx0 Analogue input module with galvanic isolation, 7 channels, 12 bits, 0…10 V (connector type E included))
BACnet and PCD FW for PCD1.M2xx0, PCD3.Mxxx0, PCD2.M5xx0 which could be used as maintenance firmware for PCD's with 4 MB firmware memory
In June 2017 the COSinus FW 1.24.69 was introduced into production for the systems PCD2.M5xx0, PCD3.Mxxx0. The corresponding BACnet and LonIP firmware is available on the support homepage. In March 2017 the COSinus FW 1.24.67 was introduced into production for the systems PCD2.M5xx0, PCD3.Mxxx0. The corresponding BACnet and LonIP firmware is available on the support homepage. In Mai 2015 the maintenance COSinus FW 1.24.30 was published for the systems PCD1.M0xx0, PCD1.M2xx0, PCD2.M5xx0, PCD3.Mxxx0, PCD3.Mxx60 and PCD7.D4xxxT5F. In February 2015 the COSinus FW 1.24.25 was introduced
The PCD2.M480, PCD2.M5xxx and PCD3.M5xxx can be used as an MPI server (Profi-S-Net port). As the mentioned PCD's only reply to MPI requests, this functionality can be used to connect for instance an intelligent terminal that supports MPI (an OP for instance), but other MPI functions like global data exchange or event driven communication are not supported.
® COSinus PLCs (PCD1.M2, PCD2.M5, PCD3 but not on PCD2.M [...] .4.300 the S-Web Editor together with an example, the required FBoxes and firmware versions for PCD2.M5xx0 and PCD3.Mxxx0 can be downloaded from the support site from section Software --> PG5 --> PG5 1.4 --> [...] -Bus communication is used between the PCD3 or PCD2.M5xx0 and the MB VGA panel (PCD7.D457Vxxx and PCD7.D410Vxxx) then it may not be possible to write to the PCD variables (depending of the firmware installed on the MB
® COSinus PLCs (PCD1.M2, PCD2.M5, PCD3 but not on PCD2.M [...] .4.300 the S-Web Editor together with an example, the required FBoxes and firmware versions for PCD2.M5xx0 and PCD3.Mxxx0 can be downloaded from the support site from section Software --> PG5 --> PG5 1.4 --> [...] -Bus communication is used between the PCD3 or PCD2.M5xx0 and the MB VGA panel (PCD7.D457Vxxx and PCD7.D410Vxxx) then it may not be possible to write to the PCD variables (depending of the firmware installed on the MB
® COSinus PLCs (PCD1.M2, PCD2.M5, PCD3 but not on PCD2.M [...] .4.300 the S-Web Editor together with an example, the required FBoxes and firmware versions for PCD2.M5xx0 and PCD3.Mxxx0 can be downloaded from the support site from section Software --> PG5 --> PG5 1.4 --> [...] -Bus communication is used between the PCD3 or PCD2.M5xx0 and the MB VGA panel (PCD7.D457Vxxx and PCD7.D410Vxxx) then it may not be possible to write to the PCD variables (depending of the firmware installed on the MB
® COSinus-Systems PCD3.Mxxx0 and PCD2.M5xx0 - Texts < 4000 are writeable in runtime but PG5 recognizes if one of these texts has changed* - Texts >= 4000 are writeable in runtime PCD3.Mxx60 and PCD1.M2xx0 - Texts are configurable in the Build Options [...] 130, PCD1.M135, PCD2.M110, PCD2.M120 and PCD2.M150 The voltage of the battery is supervised. SBC advise to change the battery all 1 - 3 years. System with active battery supervision since
