COSinus FW 1.28.37 was released as maintenance version for the systems: - PCD1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668 . In June 2017: the COSinus FW 1.28.16 was introduced into production for the systems: - PCD1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668 . the BACnet and LonIP FW 1.28.16 was put into production [...] the following PCD's with 8 MB onboard firmware memory: PCD1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668 The table below does show the hardware dependencies in
.F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD [...] specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices
.F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD [...] specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices
The communication modules PCD2.F2150 and PCD3.F215 with BACnet MS/TP allow the direct connection of max. two BACnet MS/TP lines and can be plugged on a PCD1.M2, PCD2.M5 or PCD3. Furthermore [...] plugged into PCD I/O slot 0..3. Modules for the PCD1.M2 and PCD2.M5 PCD2.F2150 up to 255 devices Modules for PCD3.Mxxx0 PCD3.F215 up to 255 [...] .F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD
The communication modules PCD2.F2150 and PCD3.F215 with BACnet MS/TP allow the direct connection of max. two BACnet MS/TP lines and can be plugged on a PCD1.M2, PCD2.M5 or PCD3. Furthermore [...] plugged into PCD I/O slot 0..3. Modules for the PCD1.M2 and PCD2.M5 PCD2.F2150 up to 255 devices Modules for PCD3.Mxxx0 PCD3.F215 up to 255 [...] .F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD
exist the following module types to be plugged into PCD I/O slot 0..3: CPU Family LON TP/FT-10 with PCD2/3.F240x module PCD1.M2xx0 Supported from hardware version F PCD2.M5xx0 Supported from hardware version D PCD3.M3xx0 PCD3.M5xx0 PCD3.M6xx0 Supported from hardware version H PCD3.Mxx60 Supported [...] link With the following PCDs it is not possible to configure the FTT10 communication modul in the device configurator PCD2.M5xx0/PCD3.M3xx0/PCD3.M5xx0/PCD3.M6xx0. However you can use it, if you
exist the following module types to be plugged into PCD I/O slot 0..3: CPU Family LON TP/FT-10 with PCD2/3.F240x module PCD1.M2xx0 Supported from hardware version F PCD2.M5xx0 Supported from hardware version D PCD3.M3xx0 PCD3.M5xx0 PCD3.M6xx0 Supported from hardware version H PCD3.Mxx60 Supported [...] link With the following PCDs it is not possible to configure the FTT10 communication modul in the device configurator PCD2.M5xx0/PCD3.M3xx0/PCD3.M5xx0/PCD3.M6xx0. However you can use it, if you
connect electrical sensors. The module is freely programmable and can also be used as a “standalone” DALI small controller. Saia PCD2/3.F26x A PCD1.M2, PCD2.M5, PCD3.M as well as a PCD3 [...] for the PCD1.M2 and PCD2.M5 PCD2.F2610 64 ballasts Modules for PCD3.Mxxx0 and PCD3.T666 PCD3.F261 64 ballasts Documentation FBoxes for working [...] .F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD
connect electrical sensors. The module is freely programmable and can also be used as a “standalone” DALI small controller. Saia PCD2/3.F26x A PCD1.M2, PCD2.M5, PCD3.M as well as a PCD3 [...] for the PCD1.M2 and PCD2.M5 PCD2.F2610 64 ballasts Modules for PCD3.Mxxx0 and PCD3.T666 PCD3.F261 64 ballasts Documentation FBoxes for working [...] .F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD
connect electrical sensors. The module is freely programmable and can also be used as a “standalone” DALI small controller. Saia PCD2/3.F26x A PCD1.M2, PCD2.M5, PCD3.M as well as a PCD3 [...] for the PCD1.M2 and PCD2.M5 PCD2.F2610 64 ballasts Modules for PCD3.Mxxx0 and PCD3.T666 PCD3.F261 64 ballasts Documentation FBoxes for working [...] .F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD
