7.T160 D-Sub 9pin on PCD Port 2 on PCD3.M3 and M6 A=RxD /TxD-N green D pin 8 D B=RxD /TxD-P red D/ pin 3 /D Example for the port 3 of the PCD3.M5540 as Serial-S-Bus RS485 connection (Serial-S-Bus) between PCD3.M5540 port 3 (S-Net D-Sub used as RS485 Serial-S-Bus) and PCD2.M5540 port 2 (connector block X3): PCD3.M5540 (D-Sub "S-Net", port 3) PCD2.M5540, X3, port2 equipped with a PCD7.F110 pin 3 terminal 2 pin 8 terminal 1
replace the CPU of a PCD4 installation by a PCD3 or a PCD2.M5 (while keeping the PCD4 I/Os). The PCD4 family has been discontinued and is no longer available. Please refer to FAQ 101098 for more [...] Product Category Archive Programmable Controller PCD4:CPUs, cassette design U [...] PCD4.U100 upgrade kit Documentations
replace the CPU of a PCD4 installation by a PCD3 or a PCD2.M5 (while keeping the PCD4 I/Os). The PCD4 family has been discontinued and is no longer available. Please refer to FAQ 101098 for more [...] Product Index Archive PCD4 U100 General [...] PCD4.U100 upgrade kit Documentations
5 Saia PCD® COSinus Firmware PCD Type Minimal Version PCD1.M0xx0 1.28.16 PCD1.M2xx0 1.28.16 PCD2.M5xx0 1.24.69 PCD3.Mxxx0 1.24.69 PCD3.Mxx60 1.28.16 PCD3.T665/T666 1.28.16 PCD7.D4xxxT5F 1.24.69 PCD7.D4xxWTPF 1 [...] Product Category Communication protocols PCD on Internet General
Previous versions Saia PCD Supervisor 4.11 Service Pack 2 This Service Pack include different *.jar files and must be installed manually over the version 4.11 (version 4.11.0.142.1.3 [...] Saia PCD Supervisor 4.11 Service Pack 1 This Service Pack include different *.jar files and must be installed manually over the version 4.11 (version 4.11.0.142.1.3) To install the [...] NEQL --------------------------------------------------------------------------------------------------------------------------- Saia PCD Supervisor 4.11 (version 4.11.0.142.1.3
3360: Power CPU with 512kByte program memory, 128MByte intflash, USB, Ethernet, 4 IO slots, expandable up to 64 IO modules. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet [...] : PG5-4526: For PCD3.M6880 it’s now possible to select correctly the FW PG5-4538: PCD1.G3600, Analog inputs 0..300kOhm, max. possible value is now 300'000 For old firmware in PCD3.M5x40 PCDs, the Build Option "Extended COB, PB and FB Numbering" option is not forced to 'Yes' PG5-4563: 'Upload All' now works for PCD3.M5340 S-Web Editor 8: WEBED-1681: Tool tacho, option clockwise
module PCD3.M6880: Dual processor PCD with redundancy support. PCD7.D443WT5R: Programmable MircroBrowser Panel, 4.3’’ inches. Project Manager: Specify the device type during the [...] begin with a digit In the TCP/IP setting table, device is not shown if Ether-S-Bus is disabled Device Configurator Corrections in Ethernet configuration for PCD3.M6860 and in media [...] and how to use the new features could be found on the document “What's new in PG5 2.1” New Features / Improvements Support for new devices: PCD1.M2220-C15: E-Line PCD controller
module PCD3.M6880: Dual processor PCD with redundancy support. PCD7.D443WT5R: Programmable MircroBrowser Panel, 4.3’’ inches. Project Manager: Specify the device type during the [...] begin with a digit In the TCP/IP setting table, device is not shown if Ether-S-Bus is disabled Device Configurator Corrections in Ethernet configuration for PCD3.M6860 and in media [...] and how to use the new features could be found on the document “What's new in PG5 2.1” New Features / Improvements Support for new devices: PCD1.M2220-C15: E-Line PCD controller
3360: Power CPU with 512kByte program memory, 128MByte intflash, USB, Ethernet, 4 IO slots, expandable up to 64 IO modules. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet [...] : PG5-4526: For PCD3.M6880 it’s now possible to select correctly the FW PG5-4538: PCD1.G3600, Analog inputs 0..300kOhm, max. possible value is now 300'000 For old firmware in PCD3.M5x40 PCDs, the Build Option "Extended COB, PB and FB Numbering" option is not forced to 'Yes' PG5-4563: 'Upload All' now works for PCD3.M5340 S-Web Editor 8: WEBED-1681: Tool tacho, option clockwise
