M2 for PCD3.M5/M6-, PCD2.M5-, PCD1.M2- and PCD1.M0 controllers. The PCD3.R58x module is available for I/O slots. A “LON communication module” is also required to connect the LON FTT10. This module provides PCD controllers with a LonWorks® interface but without a router function. PCD1.M2 controllers require the PCD2.F2400 module and PCD3 controllers (see supported PCD3 devices in the table belwo [...] of a PCD connected to a BACnet/IP network which could lead to a missinterpretation. Although BACnet is supported by a PCD3 or a PCD2.M5xx0 and LON on IP will be suppored in future, it won't be possible
.ch. On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s possible to use BACnet on both ports ETH1 or ETH2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a bad behavior on BACnet. The activation and selection of the used Ethernet port for BACnet communication on the PCD3.M6860 is done in PG5 2.2 or PG5 2.3
.ch. On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s possible to use BACnet on both ports ETH1 or ETH2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a bad behavior on BACnet. The activation and selection of the used Ethernet port for BACnet communication on the PCD3.M6860 is done in PG5 2.2 or PG5 2.3
.ch. On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s possible to use BACnet on both ports ETH1 or ETH2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a bad behavior on BACnet. The activation and selection of the used Ethernet port for BACnet communication on the PCD3.M6860 is done in PG5 2.2 or PG5 2.3
. Firmware compatibility PCD6.M3 and PCD6.M1/2 (FAQ #100147) PCD6.M3 PCD2.M1/M2 Ã [...] Ethernet module. However, as the PCD6 system has been discontinued, also the Ethernet module (PCD7.F651) for the PCD6 systems has been discontinued. To have an Ethernet TCP/IP port on a PCD, a PCD6.M3F650 had to be ordered (not possible any more). This version of the PCD6.M3 contains a PCD7.F651 module and has an Ethernet connector on the front plate instead of a D-Sub connector. It takes a single slot
. Firmware compatibility PCD6.M3 and PCD6.M1/2 (FAQ #100147) PCD6.M3 PCD2.M1/M2 Ã [...] Ethernet module. However, as the PCD6 system has been discontinued, also the Ethernet module (PCD7.F651) for the PCD6 systems has been discontinued. To have an Ethernet TCP/IP port on a PCD, a PCD6.M3F650 had to be ordered (not possible any more). This version of the PCD6.M3 contains a PCD7.F651 module and has an Ethernet connector on the front plate instead of a D-Sub connector. It takes a single slot
. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet, RS-232, 4 IO slots, expandable up to 64 IO modules. Fupla: Status indicators of unconnected FBox [...] . PG5 2.2 On a PCD3.M6860 it’s possible to use [...] 2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a
. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet, RS-232, 4 IO slots, expandable up to 64 IO modules. Fupla: Status indicators of unconnected FBox [...] . PG5 2.2 On a PCD3.M6860 it’s possible to use [...] 2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a
. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet, RS-232, 4 IO slots, expandable up to 64 IO modules. Fupla: Status indicators of unconnected FBox [...] . PG5 2.2 On a PCD3.M6860 it’s possible to use [...] 2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a
Our solution Products: Classic/PG5 Restrictions Building Automation and Control Network PCD1.M2, PCD2.M5 and PCD3 with BACnet [...] of PCD2.M5xx0 and PCD3.Mxxx0 CPUs, FBoxes are available. System partners provide solutions as well: Classic: refer to www.engiby.ch or www.ludwig-systemelektronik.de for more information [...] /PG5 Products: xx7/Step7 Restrictions This is a variant of the Modbus protocol on Ethernet Modbus is supported by the Firmware of PCD2.M5xx0 and PCD3
