. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet, RS-232, 4 IO slots, expandable up to 64 IO modules. Fupla: Status indicators of unconnected FBox [...] checkout our PCD3.M6893 (QronoX PCD), this PCD was developed for cybersecure applications. Information's can be found here . [...] ) On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s
. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet, RS-232, 4 IO slots, expandable up to 64 IO modules. Fupla: Status indicators of unconnected FBox [...] checkout our PCD3.M6893 (QronoX PCD), this PCD was developed for cybersecure applications. Information's can be found here . [...] ) On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] Ymax - Range Example: the sensor gives 4...20 mA and we want to display a value from 0...500 m3 using a PCD4.W300 card! Range = (500- 0) . 20 mA = 625 [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] Ymax - Range Example: the sensor gives 4...20 mA and we want to display a value from 0...500 m3 using a PCD4.W300 card! Range = (500- 0) . 20 mA = 625 [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] Ymax - Range Example: the sensor gives 4...20 mA and we want to display a value from 0...500 m3 using a PCD4.W300 card! Range = (500- 0) . 20 mA = 625 [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on
connected to PCD3.Mxxx or PCD2.M480 PLC's over Profi S-Bus, the terminal loses the communication after some time and get even frozen. This problem is corrected in the new boot, FW and driver. The PCD8.D81 V 5.09 is needed , the attached files have to be copied in it (see procedure below). It is also necessary to update the PCD3.Mxxx and PCD2.M480 FW with the version PCD3.Mxxx_023.blk / PCD2.M480_$27 or [...] 01 0271 0022 fexible cable Note: If the bautrates isn't greater than 187,5 bautes (for ex. Profi S-Bus with PCD3.M3xx / PCD7.D7xx) you can use other more advantegeous cable, especially
If once the Software Watchdog is configured on a PCD2.M150, the system can't be started any more until the FW will be changed to either an older version (not recommended) or to the latest version 0E3 (recommended)!
The PCD3.M6880 Standby Controllers are for creating redundant automation solutions, to ensure the uninterrupted operation of systems and processes.
For BCU1 protocol not all communication interfaces of a PCD3 or a PCD2.M5540 can be used. On the other hand there is no problem using the newer FT1.2 protocol which is supported by all RS232 interfaces of the PCD3 and the PCD2.M5540.
. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet, RS-232, 4 IO slots, expandable up to 64 IO modules. Fupla: Status indicators of unconnected FBox [...] 101653 . Minimal firmware version for the Manager is 1.16.42 (PCD1.M2) and 1.16.45 (PCD2.M5 and PCD3), see FAQ 101640 . Minimal version of PG5 for configuring a PCD3.T665¦T666 is PG5 2.0 SP2 (PG5 [...] ’. This change has been made in order to be compatible with the Windows 10 start menu that’s accept only one level of folder. Device configurator: PCD3.M3160: Power CPU with 512kByte program
