CPU base units for 4 plug-in I/O modules - Saia PCD3.M3 series PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system, CPU with 512 KByte user program, 128 MByte user Flash memory with file system, clock (RTC), USB port for PG5, up to 1024 I/O, 2 interrupt inputs, RS-485 for Profi-S-Net or S-Bus
CPU base units for 4 plug-in I/O modules - Saia PCD3.M6 series PCD3 processor unit with 2 Ethernet TCP/IP, web and FTP server, file system, CPU with 2 MByte user program, 1 MByte SRam extension memory, 128 MByte user Flash memory with file system, clock (RTC), data protection 1-3 years, USB port for PG5, up to 1024 I/O, 2 interrupt inputs, RS-485 for Profi-S-Net/MPI/S-Bus
can be used in I/O slots 0 to 3 of PCD2.M5 or I/O slot 0 or 1 on a PCD2.M4 or PCD1.M2 [...] PCD2.F2xxx Serial communication modules to be placed in I/O slots 0..3 [...] Product Category Programmable controller PCD2: CPUs, flat design Fxx: Comm modules F281x: MP Bus
can be used in I/O slots 0 to 3 of PCD2.M5 or I/O slot 0 or 1 on a PCD2.M4 or PCD1.M2 [...] PCD2.F2xxx Serial communication modules to be placed in I/O slots 0..3 [...] Product Category Programmable controller PCD2: CPUs, flat design Fxx: Comm modules F2xxx: Serial comm
In case a BACnet firmware module has been installed on a PCD3.Mxxx0 or a PCD2.M5xx0 and a timezone has been configured, the time stamp of an S-Web alarm has an offset to the PCD time. There could be the same behaviour when you are using the SNTP (Simple Network Time Protocol).
-saving on the slots M1 and M2. The module can be used in the systems PCD1.M2/M0, PCD2.M5, PCD3.M and on the programmable MB panel PCD7.D457VT5F, PCD7.D410VT5F and PCD7.D412DT5F. Software [...] Product Index PCD7 Rxxx: Memory modules R610 General [...] PCD7.R610 uSD Flash memory card with file system
7.T160 D-Sub 9pin on PCD Port 2 on PCD3.M3 and M6 A=RxD /TxD-N green D pin 8 D B=RxD /TxD-P red D/ pin 3 /D Example for the port 3 of the PCD3.M5540 as Serial-S-Bus RS485 connection (Serial-S-Bus) between PCD3.M5540 port 3 (S-Net D-Sub used as RS485 Serial-S-Bus) and PCD2.M5540 port 2 (connector block X3): PCD3.M5540 (D-Sub "S-Net", port 3) PCD2.M5540, X3, port2 equipped with a PCD7.F110 pin 3 terminal 2 pin 8 terminal 1
a PCD2.M5xx0? (FAQ #101386) No, the PCD4.C225 is not supported by a PCD2.M5xx0 CPU. Due to the higher processing speed of the PCD2.M5 (compared to e.g. a PCD2.M150) it can not be guaranteed that the I/O modules are correctly accessed. Why is this fact not stated in the manual for the PCD4? In the manual for the PCD4 (27/734) there is not information regarding this restriction (it is only stated that a PCD2.M110 can not be used togheter with the PCD4.C225, and that no H-Modules or W1/W2/W3 modules
a PCD2.M5xx0? (FAQ #101386) No, the PCD4.C225 is not supported by a PCD2.M5xx0 CPU. Due to the higher processing speed of the PCD2.M5 (compared to e.g. a PCD2.M150) it can not be guaranteed that the I/O modules are correctly accessed. Why is this fact not stated in the manual for the PCD4? In the manual for the PCD4 (27/734) there is not information regarding this restriction (it is only stated that a PCD2.M110 can not be used togheter with the PCD4.C225, and that no H-Modules or W1/W2/W3 modules
The new WebServer 2 implemented in the PCD3 and PCD2.M5xxx supports caching and therefore the loading of the Java Applet can be avoided when reloading web pages. From firmware version 1.10.16 on you can profit of the caching possibility of the Java Virtual Machine.
