PCD7.R56x PCD3.R56x BACnet modules for Saia PCD2.M5xx0 / PCD3 [...] memory modules and on the INTFLASH (if available). These are: PCD1.M2xxx (INTFLASH) PCD2.R6000 PCD3.R550, PCD3.R551, PCD3.R561 PCD3.R600 PCD7.R550, PCD7.R551, PCD7.R561 INTFLASH of a PCD3 Compact or a PCD1.M
PCD3.R55x Flash memory module with file system for Saia PCD3.M3xxx Documentation Good to [...] memory modules and on the INTFLASH (if available). These are: PCD1.M2xxx (INTFLASH) PCD2.R6000 PCD3.R550, PCD3.R551, PCD3.R561 PCD3.R600 PCD7.R550, PCD7.R551, PCD7.R561 INTFLASH of a PCD3 Compact or a PCD1.M
Modbus driver is implemented in the firmware of the PCD1.M2, the PCD2.M5 and all PCD3 controllers. The configuration of the driver is done by FBoxes or in IL. The physical layers supported are RTU, ASCII [...] (default for Modbus) Modbus Client: (PCD3.M3330) IP Address: 172.16.1. 45 Modbus Server: (PCD3.M5540) IP Address: 172.16.1. 46 UID: 33 (Unit Identifier [...] Modbus are automatically installed with PG5 2.0 but need to be licensed. For older PCD systems (such as the PCD2.M170 or the PCD1.M1x5) a pure FBox solution from the company Engiby exists
The communication modules PCD2.F2150 and PCD3.F215 with BACnet MS/TP allow the direct connection of max. two BACnet MS/TP lines and can be plugged on a PCD1.M2, PCD2.M5 or PCD3. Furthermore [...] plugged into PCD I/O slot 0..3. Modules for the PCD1.M2 and PCD2.M5 PCD2.F2150 up to 255 devices Modules for PCD3.Mxxx0 PCD3.F215 up to 255 [...] .F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD
higher PCD FW: Firmware 1.28.11 or higher PCD2.F2150 / PCD3.F215: Firmware 1.04.04 or higher These version including BACnet Stack Rev 14, automatic mapping and symbol creation and BACshark tool for .ede file generation Only the plant controllers PCDx.Mxx60 and the PCD1.M2220-C15 are compatible to connect the PCD7.LRxx room controllers [...] Product Index PCD7 Lxxx: RIOs and room controllers LRxx: BACnet room controller
speed of the PCD7-L60x-1 Example: If the register has the value: ‘30’ then the maximum speed would be 3 and the minimum speed 0 ‘22’ then the maximum speed would be 2 and the minimum speed 2 -> the [...] . Which inputs values needs the FBox 'Man AO' (L60x-1 Man AO) to control the Y3/Y4/PWMs outputs on a PCD7.L60x-1 controller? (FAQ #101837) [...] FBox family 'RoomControler PCD7_60x V2' does need to have a decimal value without decimal point. (for an output value of 8.3 V the decimal value 83 have to be set) This FBox allows the manual
speed of the PCD7-L60x-1 Example: If the register has the value: ‘30’ then the maximum speed would be 3 and the minimum speed 0 ‘22’ then the maximum speed would be 2 and the minimum speed 2 -> the [...] . Which inputs values needs the FBox 'Man AO' (L60x-1 Man AO) to control the Y3/Y4/PWMs outputs on a PCD7.L60x-1 controller? (FAQ #101837) [...] FBox family 'RoomControler PCD7_60x V2' does need to have a decimal value without decimal point. (for an output value of 8.3 V the decimal value 83 have to be set) This FBox allows the manual
PCD3 Overview PCD3.M PCD3 Plus (fast CPU) Overview PCD3.M Compact and extendable PCD3 Compact Overview PCD3.M
to a bus and simplify the cable work significantly for HeaVAC applications.With PCD2.F2810 (for PCD1.M2xx0 and PCD2.M5) and PCD3.F281 modules (for PCD3 systems) a PCD system can be connected to the MP [...] 2.F2810 Serial interface module with 1x Belimo MP-Bus (max. 8 (16* 1 ) actuators and sensors) and 1 socket for PCD7.F1xx module. To be plugged into I/O slot 0..3 of a PCD1.M2xx0 or a PCD2.M [...] .F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD
to a bus and simplify the cable work significantly for HeaVAC applications.With PCD2.F2810 (for PCD1.M2xx0 and PCD2.M5) and PCD3.F281 modules (for PCD3 systems) a PCD system can be connected to the MP [...] 2.F2810 Serial interface module with 1x Belimo MP-Bus (max. 8 (16* 1 ) actuators and sensors) and 1 socket for PCD7.F1xx module. To be plugged into I/O slot 0..3 of a PCD1.M2xx0 or a PCD2.M [...] .F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD
