MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that [...] (CVE-2017-9628) All PCD's: The Modbus CSF CloseSRPort does not free the port then a open/SASI call give an error and the port does not work. PCD1.M2xx0 PCD1.M22x0 PCD2.M4x60: PCD can crash while power down [...] PG5 2.1 and 2.2 with E-Line S-Bus communication library < 1.2.110, why the S-Bus communication on the master PCD stops either after a certain time? (FAQ #102009)
correctly. Solution This problem is solved with hardware version A or C and newer of the PCD2.W6x5 or PCD3.W6x5 respectively [...] value of the analogue outputs of the PCD2.W605/W615/W625 card, if the PCD2.W6x5 card is plugged in a PCD2.C1000 or PCD2.C2000 extension? (FAQ #102030) [...] analogue output value of the PCD2.W6x5 module with the application program, if the PCD2.W6x5 card is plugged in to a PCD2.C1000/C2000 extension Concerned products: PCD2.W6x5 cards
correctly. Solution This problem is solved with hardware version A or C and newer of the PCD2.W6x5 or PCD3.W6x5 respectively. [...] PCD3 / W6x5 Why do the output of the PCD2 [...] the W6x5 module is plugged in, it’s possible that the analog output signal supplied from the W6x5 is not stable and is oscillating. Symptom The outputs of the PCD2/3.W6x5 do not deliver stable
correctly. Solution This problem is solved with hardware version A or C and newer of the PCD2.W6x5 or PCD3.W6x5 respectively. [...] PCD3 / W6x5 Why do the output of the PCD2 [...] the W6x5 module is plugged in, it’s possible that the analog output signal supplied from the W6x5 is not stable and is oscillating. Symptom The outputs of the PCD2/3.W6x5 do not deliver stable
correctly. Solution This problem is solved with hardware version A or C and newer of the PCD2.W6x5 or PCD3.W6x5 respectively [...] value of the analogue outputs of the PCD2.W605/W615/W625 card, if the PCD2.W6x5 card is plugged in a PCD2.C1000 or PCD2.C2000 extension? (FAQ #102030) [...] analogue output value of the PCD2.W6x5 module with the application program, if the PCD2.W6x5 card is plugged in to a PCD2.C1000/C2000 extension Concerned products: PCD2.W6x5 cards
version 005 can be found on the PCD4.M1x0 pages. PCD4.M340 (obsolete): CPU0 has got the same firmware as a PCD4.M1x0, the latest version 005 can be found on the PCD4.M1x0 pages. CPU1 with LAN2 has the [...] (or in case a PC is used, by interpreting the tracewin files). This phenomenon can be observed on PCD1.M1x5, PCD2.M150, PCD2/4.M170 and PCS1 systems (with firmware which are supporting the "Secure S [...] appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3). Symptom Instead of the
4.M340 (obsolete): CPU0 has got the same firmware as a PCD4.M1x0, the latest version 005 can be found on the PCD4.M1x0 pages. CPU1 with LAN2 has the same firmware as a PCD6.T1xx, last version 005, only available on [...] (or in case a PC is used, by interpreting the tracewin files). This phenomenon can be observed on PCD1.M1x5, PCD2.M150, PCD2/4.M170 and PCS1 systems (with firmware which are supporting the "Secure S [...] appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3). Symptom Instead of the
of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a [...] be loaded again). All PCD1.M2 and PCD2.M5 systems can be equipped with a firmware 1.16. and more recent [...] address bound to an IP address. Does a PCD generate gratuitous ARP telegrams? No, a PCD (e.g. a PCD3, a PCD2.M5xxx or a PCD equipped with a PCD7.F655) does not generate gratuitous ARP telegrams when
of a PCD3.T760 using WebConnect 2.x, it is not automatically possible downloading a new I/O configuration. Symptom After having connected to the WebServer of a PCD3.T760 RIO, it is [...] -Web-Connect (WebConnect 2.x) to a PCD with the use of a URL address: To change the state of the connection of S-Web-Connect you can use the following URL [...] the PCD can’t be accessed with HTTP protocol (FAQ #101686) You try to access a File on the Web-Server of the PCD with
of a PCD3.T760 using WebConnect 2.x, it is not automatically possible downloading a new I/O configuration. Symptom After having connected to the WebServer of a PCD3.T760 RIO, it is [...] -Web-Connect (WebConnect 2.x) to a PCD with the use of a URL address: To change the state of the connection of S-Web-Connect you can use the following URL [...] the PCD can’t be accessed with HTTP protocol (FAQ #101686) You try to access a File on the Web-Server of the PCD with
